Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Light Option:   Composite

Specifications:
  • LH (Driver Side)
  • Replaces dealer part numbers: 1C3Z-13008-BA, 2C3Z-13008-AB, 1C3Z13008BA, 2C3Z13008AB
  • Aero Style Plastic Lens
  • Includes lens, housing, and adjusting screws
  • Bulbs not included
  • Fits models with Composite Style headlights only
    • Does NOT fit models with Sealed Beam style headlights
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Changing the Headlight Bulbs (1:05)
    • Reach in to the back of the light and twist the ring counter clockwise
    • Pull it off to pull the bulb out
    • Hold the collar back and pull the bulb free
    • Push a new bulb in and snap it back into the ring
    • Push the bulb back into the assembly and twist clockwise
  2. step : Removing the Headlight Assembly (2:34)
    • Use an awl to pull the arms out and up on the side of the tabs holding in the headlight
    • Hook the awl into the top of the clip and force it up and out. Repeat on the other side of the light
    • Remove the clip down past the headlight wiring harness. Remove the clip by pressing in the wings on either side
    • Pull the headlight out
    • Disconnect the harnesses to free the light
  3. step : Installing the New Headlights (6:24)
    • Adjust the lower clip to match the clip on the old headlight
    • Measure the top adjustors to make sure they are the same distance from the light
    • Reconnect the light harnesses
    • Line up the light and push it in to connect it
    • Push the clips on the back, back into place
  4. step : Adjusting the Headlight (8:43)
    • Set the light to your states standards
    • The right Phillips screw adjusts the light left to right
    • The left Phillips screw adjusts the light up and down

Tools needed for replacement:

    General Tools

  • Flashlight

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Specialty Tools

  • Bent Tipped Awl

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2004Ford Excursion Ford Excursion Composite Headlight Driver Side
1999-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck Composite Headlight Driver Side
1999-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck Composite Headlight Driver Side
1999-2003Ford F450 Truck Ford F450 Truck Composite Headlight Driver Side
1999-2003Ford F550 Truck Ford F550 Truck Composite Headlight Driver Side
Part #: 1ALHL00383


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:32 min)