Replaces

Ford Grille, Headlights & Parking Lights Kit - 1ABGK00052

This replacement lighting and grille kit is just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a SET of 7
    • (2) - Headlights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Parking Lights - LH (Driver Side) & RH (Passenger Side)
    • (2) - Chrome Headlight Bezels - LH (Driver Side) & RH (Passenger Side)
    • (1) - Gloss Black Grille
  • High quality injection molded plastic
  • Direct fit replacements
  • Built to strict quality control standards

This headlight, parking light, bezel, and grill set makes a great replacement and has good cost savings over the dealer units.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Part Details

  • Color: Gloss Black

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Headlight Trim (0:42)
    • Twist the headlight socket out of the headlight
    • Remove the two 10mm nuts from the rear of the headlight trim
    • Remove the two Phillips screws from the top of the headlight trim
    • Pull the headlight trim forward and off
    • Twist the side marker light socket counterclockwise and out
    • Twist the parking light socket counterclockwise and out
    • If any of the studs remain behind, remove it with vise grip pliers
  2. step : Separating the Lights from the Headlight Trim (3:03)
    • Remove the two 11mm bolts from the side marker light
    • Pull the side marker light out of the trim
    • Remove the three Phillips screws from the parking light
    • Pull the parking light out of the trim
  3. step : Installing the Lights into the New Trim (3:41)
    • Put the parking light onto the trim
    • Insert the three Phillips screws into the parking light
    • Put the side marker light onto the trim
    • Put the marker light brace into place
    • Fasten the two 11mm bolts onto the marker light
  4. step : Installing the Headlight Trim (6:22)
    • Twist the parking light socket clockwise into the light
    • Twist the side marker light socket clockwise into the light
    • Push the headlight trim into place
    • Insert the two Phillips screws into the top of the headlight trim
    • Fasten the two 10mm nuts onto the rear of the headlight trim
    • Twist the headlight socket into the light

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket

2.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
1
0
For the most part it was good one headlight assembly had crack and broke upon installation
September 20, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
Can I get the bezel in black rather than chrome? Also a price including the side marker lens?
Irwin F on Apr 17, 2016

Vehicle Fit

  • 1992-1996 Ford Bronco Gloss Black Grille, Headlights & Parking Lights Kit
  • 1992-1996 Ford F150 Truck Gloss Black Grille, Headlights & Parking Lights Kit
  • 1992-1996 Ford F250 Truck Gloss Black Grille, Headlights & Parking Lights Kit
  • 1997 Ford F250 Truck Gloss Black Grille, Headlights & Parking Lights Kit
  • 1992-1997 Ford F350 Truck Gloss Black Grille, Headlights & Parking Lights Kit
  • 1992-1997 Ford F450 Truck Gloss Black Grille, Headlights & Parking Lights Kit

This part replaces:

  • OE # F4TZ8200A
  • OE # F3TZ13064BAA
  • OE # F3TZ13064AAA
  • OE # F2TZ13008B
  • OE # F2TZ13008A
  • OE # F5TZ13201AB
  • OE # F5TZ13200AB
Part #: 1ABGK00052

How-to Video:

(07:11 min)