Replaces

Ford Grille, Header Panel & Headlight Trim Kit - 1ABGK00044

This replacement headlight mounting panel, headlight trim, and grille kit is just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a SET of 4
    • (2) - Gloss Black Headlight Bezels - LH (Driver Side) & RH (Passenger Side)
      • Replaces dealer part numbers: F3TZ-13064-AAA, F3TZ-13064-BAA, F3TZ13064AAA, F3TZ13064BAA
    • (1) - Gloss Black Grille
      • Replaces dealer part number: F4TZ-8200-A, F4TZ8200A
    • (1) - Headlight Mounting Panel
      • Replaces dealer part number: F6TZ-8A284-AC, F6TZ8A284AC
  • High quality injection molded plastic
  • Direct replacements
  • Built to strict quality control standards
  • Grille has proper area for the Ford emblem (not included)

This headlight mounting panel, headlight trim, and grille kit makes a great replacement and has good cost savings over the dealer units.

NOTE: It is necessary to reuse your original hardware, as new hardware is not included with this item.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    Note: DO NOT TOUCH the bulbs- the oil from your fingers will burn into the light and foul your bulb. Clean with rubbing alcohol and a soft cloth if the bulbs do get touched.

  1. step : To replace just the headlight bulbs (0:45)
    • Pop the hood and secure it.
    • Reach behind the headlight assembly.
    • Remove and replace the bulb.
  2. step : Remove the parking light assembly (1:50)
    • Use a 10mm deep socket to remove the bolt and the three nuts securing the parking light assembly
    • Remove the two Phillips screws at the top of the headlight trim panel
    • Pull the parking light out.
    • Unplug the wiring harness and bulbs.
  3. step : Remove the headlight assembly (3:20)
    • Use a pair of needle nose pliers or a bent tipped awl to unclip the three clips securing the headlight assembly
    • pull out and unplug the wiring harness and bulbs
  4. step : Aim headlights (4:55)
    • Adjust the adjustor bolts to match the old headlight assembly for a preliminary aim.
  5. step : install the headlight assembly (5:45)
    • Plug in the bulbs and harness
    • Seat the headlight assembly and clip it in
  6. step : Reassemble the parking light assembly (8:00)
    • You put the trim back in place with the parking and marker lights.
    • Make sure you reconnect the two side marker lights first, and then you can reconnect the larger parking light from the back, and then put the trim into place.
    • Start the two nuts on the back side and tighten them up.
    • Finish up by reinstalling the two screws on the top of the trim.

Tools needed for replacement:

    Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

  • Specialty Tools

  • Bent Tipped Awl

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
1996 Header Panel- Used on 1997
I bought this set for a 1997 f250. I needed to replace the header panel in order to provide something for my lights to attach to. The old header has 11 bolts. The new header is a perfect match to the old one, though it does have some installation pains. I was only able to get 9 of the 11 bolts reinstalled. The two bolts at the bottom would not work out, as the holes seemed to be too high on the new panel. Nonetheless, 9/11 bolts isn't bad at all.

The panel paired effortlessly with the included bezel and grill. The 1997 lights I bought fit perfectly in the bezel.

Shipping was near instantaneous.
February 9, 2016
Good but could be better
This is as good as it probably gets, short of picking these parts off of a junkyard truck. Plastic is good quality, strong and durable. Fit is good, but not identical to OEM parts. Some trimming is required for certain areas, but that is fairly minor.
Overall, this is a great kit and a great choice for replacement parts, at a GREAT price.
Hardware is NOT included, so be sure to save your bolts/screws/shims/etc from your old one!
March 30, 2017
Purchased
1 year ago
Looks great on the truck............................
November 23, 2017
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Ford Bronco Black Grille, Header Panel & Headlight Trim Kit
  • 1992-1996 Ford F150 Truck Black Grille, Header Panel & Headlight Trim Kit
  • 1992-1996 Ford F250 Truck Black Grille, Header Panel & Headlight Trim Kit
  • 1992-1997 Ford F350 Truck Black Grille, Header Panel & Headlight Trim Kit
  • 1992-1996 Ford F450 Truck Black Grille, Header Panel & Headlight Trim Kit
Part #: 1ABGK00044



How-to Video:

(08:49 min)