Replaces

Ford Fuel Pump & Sending Unit Module Delphi HP10089 - DEFPU00032

Specifications:

  • Brand New Delphi Electric Fuel Pump & Sending Unit
  • Direct replacement
  • Built to strict quality control standards

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnecting the Fuel Tank (0:17)
    • Remove the negative battery terminal with an 11mm wrench
    • Loosen the fuel filler neck bracket from the metal line
    • Loosen the vent hose bracket from the metal line
    • Pull off both hoses
    • Loosen the vent hose bracket on the tank
    • Remove the vent hose from the tank
    • Disconnect the sensor
    • Disconnect the fuel pump connector
    • Remove the locks from the fuel lines with a flat bladed screwdriver
    • Disconnect the pressure and return lines with a disconnect tool
    • Remove the vent hose from the fuel tank
  2. step : Removing the Fuel Tank (3:50)
    • Have a help hold the gas tank
    • Loosen the 13mm bolt from one side of the strap
    • Let the strap hang down
    • Remove the 13mm bolt from the second strap
    • Lower the fuel tank down
  3. step : Removing the Fuel Tank and Sending Unit (5:06)
    • Work in a well ventilated area
    • Clean dirt and debris from around the sending unit
    • Remove the 10mm bolts from atop the sending unit
    • Lift the sending unit up and out
  4. step : Installing the Fuel Tank and Sending Unit (7:46)
    • Lower the sending unit into the tank
    • Tighten the 10mm bolts to the sending unit evenly
  5. step : Installing the Fuel Tank (9:05)
    • Lift the gas tank into place with the help of an assistant
    • Tighten the 10mm bolts to the fuel tank strap
  6. step : Reconnecting the Fuel Tank (9:33)
    • Remove the caps from the pressure and return lines
    • Connect the return lines and clip the safety cache into place
    • Connect the vacuum hose and hose clamp to the fuel tank
    • Connect the electrical sensor
    • Reinstall the filler neck hose and hose clamp to the metal line
    • Reinstall the vent hose and hose clamp to the metal line
    • Reconnect the sensor on the fuel tank
    • Reinstall the vent hose on the fuel tank
    • Tighten down the tank straps
    • Reconnect the negative terminal with an 11mm socket and ratchet
    • Cycle the key three times to prime the pump
    • Start the engine

Tools needed for replacement:

    General Tools

  • Pick
  • Drain Pan
  • Wire Brush
  • Assistant

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Paper Towels

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 8mm Socket
  • 11mm Socket

  • Specialty Tools

  • Fuel Line Disconnect Tool

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
I'm so happy with the product it was delivered on time and it's a good-looking quality thanks 1A Auto
April 4, 2018
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004 Ford F150 Heritage Truck Fuel Pump & Sending Unit Module V8 4.6L with 138.8" Wheel Base Delphi HP10089
  • 2004 Ford F150 Heritage Truck Fuel Pump & Sending Unit Module V8 4.6L with 157'' Wheel Base Delphi HP10089
  • 2004 Ford F150 Heritage Truck Fuel Pump & Sending Unit Module V8 4.6L with 138.5" Wheel Base Delphi HP10089
  • 2004 Ford F150 Heritage Truck Fuel Pump & Sending Unit Module V6 4.2L with 138.8" Wheel Base Delphi HP10089
  • 2004 Ford F150 Heritage Truck Fuel Pump & Sending Unit Module V6 4.2L with 138.5" Wheel Base Delphi HP10089
  • 2004 Ford F150 Heritage Truck 2 Wheel Drive Fuel Pump & Sending Unit Module V6 4.2L with 120.2" Wheel Base Delphi HP10089
  • 2004 Ford F150 Heritage Truck 2 Wheel Drive Fuel Pump & Sending Unit Module V6 4.2L with 119.9" Wheel Base Delphi HP10089
  • 1997-1998 Ford F150 Truck Fuel Pump & Sending Unit Module for Models with with 157'' Wheel Base V6 4.2L Delphi HP10089
  • 1997-1998 Ford F150 Truck Fuel Pump & Sending Unit Module for Models with with 157'' Wheel Base V8 4.6L Delphi HP10089
  • 1997-1998 Ford F150 Truck Fuel Pump & Sending Unit Module with 139" Wheel Base V8 4.6L Delphi HP10089
  • 1997-1998 Ford F150 Truck Fuel Pump & Sending Unit Module with 139" Wheel Base V6 4.2L Delphi HP10089
  • 1999-2003 Ford F150 Truck 2 Wheel Drive Fuel Pump & Sending Unit Module with 120'' Wheel Base V6 4.2L Delphi HP10089
  • 1999-2003 Ford F150 Truck Fuel Pump & Sending Unit Module for Models with with 157'' Wheel Base V8 4.6L Delphi HP10089
  • 1999-2003 Ford F150 Truck Fuel Pump & Sending Unit Module with 139" Wheel Base V6 4.2L Delphi HP10089
  • 1999-2003 Ford F150 Truck Fuel Pump & Sending Unit Module with 139" Wheel Base V8 5.4L (excluding Supercharged Models) Delphi HP10089
  • 1999-2003 Ford F150 Truck Fuel Pump & Sending Unit Module for Models with with 157'' Wheel Base V8 5.4L (excluding Supercharged Models) Delphi HP10089
  • 1999-2003 Ford F150 Truck 2 Wheel Drive Fuel Pump & Sending Unit Module with 120'' Wheel Base V8 4.6L Delphi HP10089
  • 1999-2003 Ford F150 Truck Fuel Pump & Sending Unit Module with 139" Wheel Base V8 4.6L Delphi HP10089
  • 1999-2003 Ford F150 Truck Fuel Pump & Sending Unit Module for Models with with 157'' Wheel Base V6 4.2L Delphi HP10089
  • 1998 Ford F250 Light Duty Truck Fuel Pump & Sending Unit Module V8 4.6L Delphi HP10089
  • 1999 Ford F250 Light Duty Truck Fuel Pump & Sending Unit Module V8 4.6L Delphi HP10089
  • 1999 Ford F250 Light Duty Truck Fuel Pump & Sending Unit Module V8 5.4L Delphi HP10089
  • 1997 Ford F250 Truck Fuel Pump & Sending Unit Module V8 4.6L Delphi HP10089

This part replaces:

  • Delphi HP10089
  • OE # XL3Z9H307EB, XL3U9H307AB
Only 1 left in stock
Part #: DEFPU00032

Delphi
Brand #: HP10089

How-to Video:

(13:21 min)