Replaces

Ford Front & Rear Paint to Match Black Exterior Door Handle 4 Piece Set - 1ADHS01751

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Color:   Black
  • Quantity:   4 Piece Set
  • Finish:   Paint to Match

 

Paint To Match Note:

"Paint-to-match finish" refers to a smooth, paintable surface. This item will not ship painted. Paint offers better coverage and adhesion, but it is not necessary for installation.

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Disconnecting the Battery (1:05)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Door Panel (1:16)
    • Pry off the courtesy light with a flat blade screwdriver
    • Pry off the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry off the mirror base trim piece by hand
    • Remove the 7mm bolt behind the courtesy light
    • Remove the 7mm bolt behind the switch panel
    • Lift the door panel up and off
    • Twist the courtesy light socket counterclockwise and out
    • Pull back the water shield
  3. step : Removing the Outside Door Handle (2:50)
    • Make sure the window is in the up position
    • Remove the 10mm bolt from the door
    • Unclip the lock rod with a flat blade screwdriver
    • Remove the rubber bolt cover plug
    • Remove the two 11mm bolts from the outside door handle
    • Pull the handle out from the outside of the door
    • Unclip the latch rod with a flat blade screwdriver
    • Pull the door handle out of the door
  4. step : Preparing the New Door Handle (4:25)
    • Pry the lock cylinder clip off of the old handle with a flat blade screwdriver
    • Push the lock cylinder out of the old handle
    • Pull the latch rod out of the old door handle
    • Push the lock cylinder into the new handle
    • Push on the lock cylinder clip
    • Clip the lock rod onto the new handle
  5. step : Installing the New Door Handle (5:10)
    • Push the new door handle into place
    • Insert the two 11mm bolts into the door handle
    • Clip on the latch rod
    • Clip on the lock rod
    • Make sure the door is unlocked
    • Test that the door opens and closes properly
    • Install the 10mm bolt into the door
  6. step : Reinstalling the Door Panel (6:50)
    • Put the water shield into place
    • Push the bolt cover plug into place
    • Lift the door panel into place using the locating clips
    • Twist the courtesy light socket clockwise into place
    • Push on the door panel
    • Insert the 7mm screw behind the courtesy light
    • Insert the 7mm screw behind the switch panel
    • Push on the mirror base trim piece
    • Connect the window switch wiring harnesses
    • Push on the switch panel starting at the back
    • Push on the courtesy light
  7. step : Reconnecting the Battery Cable (8:37)
    • Connect the negative battery cable with an 8mm wrench

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 11mm Socket
  • 10mm Socket
  • 7mm Socket

  • Wrenches - Metric

  • 8mm Wrench

3.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
1
OEM Quality Product!!
Purchased these handles for my 2008 Ford F-350. Had them painted the next day and installed them on the truck and all went smoothly. The installation video came in handy as always. Defiantly gave my truck a little extra custom look that I was hoping for. I defiantly recommend this product. High quality product for sure.
June 20, 2018
Not OEM Fitment
If you have a single broken door handle, this might work as a functional replacement. However, do not buy these thinking you will upgrade your door handles from matte to gloss. Within 15 minutes of installation, the friction-held pin backed itself out and the handle came out of the assembly. This happened twice. Reusing the pin from the OE assembly solved this issue as it is 1/4" longer. One of the 4 handles seems to have been updated as it had a keeper clip on the bottom of the pin to stop it from backing out. All other replacements did not. Both passenger side handles came with a gasket seal to the door. The old OE handles had no gasket, and neither did the aftermarket drivers side handles... But the passenger side new ones did, for some reason. None of the 4 door handle assemblys actually sit flush in the door skins, either. They stick out from the door about 1/8", noticeable from behind the truck but not perpendicular to it. Also, the "paint to match" set must actually be painted. They arrived in the box as new with surface scratches while sealed in the bag. I wont be having these on my truck for very long, im already searching for actual OEM replacements. These have extremely cheap build quality and I cant see lasting very long. Would not buy again.
August 4, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2000-2005Ford Excursion Ford Excursion Front & Rear Paint to Match Black Exterior Door Handle 4 Piece Set
1999-2016Ford F250 Super Duty Truck Ford F250 Super Duty Truck Front & Rear Paint to Match Black Exterior Door Handle 4 Piece Set
1999-2016Ford F350 Super Duty Truck Ford F350 Super Duty Truck Front & Rear Paint to Match Black Exterior Door Handle 4 Piece Set
1999-2016Ford F450 Truck Ford F450 Truck Front & Rear Paint to Match Black Exterior Door Handle 4 Piece Set
1999-2016Ford F550 Truck Ford F550 Truck Front & Rear Paint to Match Black Exterior Door Handle 4 Piece Set
Part 1ADHS01751
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.