1ALFP00078-Ford Fog / Driving Light Pair

Replaces

Ford Fog / Driving Light Pair DIY Solutions

1ALFP00078

Part Details

  • Quantity: Pair

This part replaces:

  • Partslink FO2593200, FO2592200
  • OE # 3C3Z15200BA
  • OE # 3C3Z15200AA
  • DIY Solutions LHT00779
FREE SAME DAY SHIPPING
Save 29%
List: $83.95 Save: $24.00
Part 1ALFP00078
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

DIY Solutions
Brand #: LHT00779

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   Pair

This pair of fog driving lights is just what you need to get your Ford Super Duty Truck or Excursion in good looking form again!

Fog Light Specifications

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side)
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement for factory installed fog light
  • Mounts in the bumper
  • Includes mounting bracket
  • Fog light does not include bulbs or wiring

This pair of fog driving lamps is a great replacement and has good cost savings over a fog light from the dealer.

 

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Your DIY Solution—Complete Repair in One Purchase

Do you need an assortment of parts to complete a repair? Stop searching for parts individually and complete your repair in a single purchase with a customized kit or set from DIY Solutions.

High-Quality Parts From Trusted Brands

Parts in DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.

Guaranteed Fit

DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Servicing the Fog Light Bulbs (0:30)
    • Twist the bulb counterclockwise
    • Pull the bulb out of the fog light
    • Disconnect the bulb from the wiring harness
    • Connect the new bulb to the wiring harness
    • Twist the new bulb clockwise into the fog light
  2. step : Removing the Fog Light (1:03)
    • Remove the two 8mm bolts from the top of the fog light bracket
    • Remove the 8mm bolt from the bottom of the fog light bracket
    • Remove the plastic locking pins from the bracket with a flat blade screwdriver
    • Remove the adjusting screw with a Phillips head screwdriver or a 10mm socket and ratchet
    • Pull the fog light bracket out through the grille
    • Disconnect the fog light wiring harness
    • Turn the fog light sideways and pull it out through the grille
  3. step : Installing the New Fog Light (4:35)
    • Remove the Phillips head screws acting as locking pins from the new fog light
    • Remove the adjusting screw from the new fog light
    • Remove the fog light from its bracket
    • Remove the bulb from the fog light
    • Push the light in through the grille
    • Push the bracket in through the grille
    • Attach the fog light to its bracket
    • Start threading the adjusting screw by hand
    • Push in the Phillips head locking clips
    • Check the wear on the old adjusting screw
    • Turn the new adjusting screw until the fog light sits where wear was on the old adjusting screw
    • Push the fog light into place
    • Start the three 8mm bolts into the fog light bracket
    • Tighten the 8mm bolts into the fog light bracket
    • Twist the bulb into the fog light
    • Connect the fog light wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 8mm Socket

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2001-2004Ford Excursion Ford Excursion Fog / Driving Light Pair
2001-2004Ford F250 Super Duty Truck Ford F250 Super Duty Truck Fog / Driving Light Pair
2001-2004Ford F350 Super Duty Truck Ford F350 Super Duty Truck Fog / Driving Light Pair
2001-2003Ford F450 Truck Ford F450 Truck Fog / Driving Light Pair
2001-2003Ford F550 Truck Ford F550 Truck Fog / Driving Light Pair

Part Interchange

Brand Label Part Number
DIY Solutions LHT00779
DIY Solutions LHT00336
DIY Solutions LHT00337
Ford 3C3Z15200AA
Ford 3C3Z 15200 AA
Ford 3C3Z 15200 BA
Ford 3C3Z15200BA
Partslink FO2593200
Partslink FO2592200

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
DIY Solutions
Brand #: LHT00779
Product Reviews
5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Great product and easy
Got these for my boyfriend and he said they were easy to install, and work great so far.
December 12, 2019
2001 Ford Excursion 4x4 7.3L
I used these as a replacement for the stock Ford units. They fit exactly the same and look great. They work well too. I have not had them on long enough to see if they fog up like some units do. I would buy these again if I needed another pair.
July 29, 2020
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Ford Fog / Driving Light Pair DIY Solutions-1ALFP00078 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.