This is a direct replacement tail light for your vehicle. It installs just as your original does. If your stop light has been damaged broken or cracked this rear light will fix the problem.

Tail light specifications:

  • LH (Driver Side)
  • Replaces dealer Part Numbers: 1S4Z 13405 CA, 1S4Z13405CA
  • Assembly includes lens and housing
  • Department of Transportation (DOT) & Society of Automotive Engineers (SAE) approved
  • Bulbs and wiring not included
  • Correct for Station Wagon Models only

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Tail Light (0:28)
    • Open the tail gate
    • Remove the Phillips head screw from the tail light
    • Remove the wing nut inside the tailgate access hole by hand
    • Pull the tail light off by hand
  2. step : Servicing the Tail Light (1:28)
    • Pull the harness clips off the tail light assembly
    • Twist the light bulb bases counterclockwise
    • Pull the bulbs out of the tail light assembly
    • If replacing the bulbs, pull the bulbs out of their sockets, and install the new bulbs
  3. step : Installing the New Tail Light (2:06)
    • Put the light bulbs into the tail light assembly
    • Turn the bulb bases clockwise
    • Connect the harness clips to the light
    • Put the light into place, threading the bolt through its hole
    • Push the locating tab into its grommet
    • Attach the wing nut to the bolt inside the tail gate
    • Insert the Phillips head screw

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Tail light and Head Light
The tail light and head light worked and delivered fine however unfortunately my daughters Ford Focus head gasket went at the time I was going to install and I ended up doing a sacrifice sale . I returned the part and received a full return . Everything looked original and the only thing that was not on the tail light was a stainless steel clip that also has a rubber round seal which I believe helps hold the light in place while you affix the screws and also a gasket around the perimeter of the tail light . In other words you get what is on the picture and you need to remove items from your tail light . Good price considering Ford dealer wanted $200 for it and almost the same for the headlight
February 19, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(04:06 min)

Tools List:

    Screwdrivers & Related

  • Phillips Head Screwdriver



This part replaces:

  • Partslink FO2800179
  • Hollander 166-01857
  • OE # 1S4Z 13405 CA
  • TYC 11-5972-01
  • DEPO 330-1914L-US

Vehicle Fit

  • 2000-2002 Ford Focus Wagon Tail Light Driver Side
  • 2003 Ford Focus Wagon Tail Light for Models with Red Housing Driver Side
Only 3 left in stock
Part #: 1ALTL00717

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More