These replacement mirrors are just what you need to get your car in good looking form again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Power mirrors
  • Heated mirrors
  • Non-folding
  • Sail mount design - mount in the corners of the doors
  • Injection molded plastic housings
  • Direct replacements
  • Built to strict quality control standards

These mirrors make great replacements and have substantial cost savings over mirrors from the dealer.

Special Note:

  • This mirror will only work properly on vehicles with these exact options. If your vehicle does not have the options listed in specifications, the mirror may not function properly.

Part Details

  • Quantity: Pair
  • Mirror Folding Type: Non-Folding
  • Mirror Heating Type: Heated
  • Mirror Operation: Power

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:53)
    • Pull the triangle trim panel out and off.
    • Disconnect the trim panel lead.
    • Remove the T20 Torx screws from around the door panel.
    • Pry off the pull handle trim.
    • Remove the two 7mm bolts.
    • Remove the door handle bezel/switch panel by prying it out.
    • Disconnect the panel by pushing on the tabs on each of the leads.
    • Pull the door panel up and off.
  2. step : Removing the Side Mirror (3:42)
    • Disconnect the harness for the mirror.
    • Remove the foam insulation.
    • Remove the T20 screw in the door jam.
    • Remove the 10mm bolt securing the mirror.
    • Push the mirror harness through and pull the mirror out.
  3. step : Replacing the Side Mirror (5:08)
    • Feed the mirror harness down through the door.
    • Line up the mirror and hold it in place as you replace the 10mm bolt.
    • Replace the T20 in the door jam.
    • Remove the grommet off of the old mirror and slide it into place on the new mirror.
    • Replace the foam insulator.
    • Reconnect the mirror harness.
  4. step : Replacing the Door Panel (6:35)
    • Hang the door panel on the window sill.
    • Line up the panel and push it into place (pull the harnesses through the door panel).
    • Reconnect and replace the door handle bezel/switch panel.
    • Replace the two 7mm bolts.
    • Push the pull handle panel back into place.
    • Replace the T20 screws around the door panel.
    • Reconnect the triangular trim panel and push it into place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
do the supply the 10mm bolts that mount it to the door ?
Cody W on Mar 27, 2018
BEST ANSWER: Mounting hardware is not included. Your original hardware must be used. Thank you!
Is this a textured or smooth finish?
Ken F on Dec 15, 2015
BEST ANSWER: Hello, These mirrors have the textured finish on them.
Will it fit to a 2001 ford focus station wagon?
Marco V on Feb 23, 2017
BEST ANSWER: This will fit Ford Focus models between the years 2003 to 2007. You would require a separate part number for your 2001 wagon.

Vehicle Fit

  • 2003-2004 Ford Focus (excluding SVT Models) Power Heated Non-Folding Mirror Pair
  • 2005-2007 Ford Focus (excluding ST Models) Power Heated Non-Folding Mirror Pair

This part replaces:

  • OE # 6S4Z17683CA
  • OE # 6S4Z17682CA
Part #: 1AMRP00094

How-to Video:

(08:01 min)