Ford Focus Mazda Tribute Exterior Door Handle - 1ADHS00239

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Color:   Black
  • Finish:   Smooth - Paint to Match

These replacement exterior door handles are just what you need to get your vehicle in good form again!


  • Door handle set includes:
    • (1) - LF (Driver Side) Front
    • (1) - RF (Passenger Side) Front for models without a key hole in the handle
    • (1) - LF (Driver Side) Rear
    • (1) - RF (Passenger Side) Rear
  • Comes black
    • can be painted by buyer to match or installed as is
  • Replaces dealer part numbers: 2T2Z7822404BAPTM, 2T2Z 7822404 BA PTM, 2T2Z78218B08, EC0258413HAA, 2T2Z 78218 B08, EC02 58413 HAA
  • Direct replacements
  • Install just as the originals do
  • Built to strict quality control standards

These handles make great replacements and have good cost savings over the individual dealer handles!

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:26)
    • Remove the T20 Torx screws securing the door panel
    • Pry up the panel in the door pull to expose the bolts underneath.
    • Use your flat blade screwdriver to pry up the bezel around the door latch.
    • Unplug the wiring harness from the lock switch.
    • Uninstall the door latch and disconnect it from the door latch rod.
    • Remove the door panel.
    • Remove the insulator and water shield
  2. step : Remove the door handle (3:52)
    • Unbolt the outside door handle and remove the door handle.
  3. step : install the door handle (4:26)
    • Clip the door handle back in.
    • Bolt the door handle back into place.
  4. step : Put the door panel back on (5:21)
    • Put the water shield and foam insulation back on
    • Replace the door panel, threading through the wiring for the lock switch.
    • Secure into place with T20 Torx screws.
    • Install the door latch, clip in the door latch rod and clip it into place.
    • Plug in the wiring harness to the latch bezel and snap it into place.
    • Replace the remaining screws and snap the door pull panel back together.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Where would you typically take the handles to be painted?
Alex L December 18, 2018
A local mechanic or paint shop would be able to assist you.
Emma F December 18, 2018
Year Make Model Description
2000-2007Ford Focus Ford Focus Smooth - Paint to Match Black Exterior Door Handle 4 Piece Set for Models with Keyless Entry
2001-2006Mazda Tribute Mazda Tribute Smooth - Paint to Match Black Exterior Door Handle 4 Piece Set for Models with Keyless Entry
Only 10 left in stock
Part #: 1ADHS00239

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:57 min)