Replaces

Ford Focus Mazda Tribute Exterior Door Handle Front - 1ADHE00476

This replacement exterior door handle is just what you need to get your vehicle in good form again!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Smooth Black Finish
    • Can be painted by buyer to match or installed as is
  • Replaces dealer part number: 2T2Z-7822404-BAPTM, 2T2Z7822404BAPTM
  • Direct replacement
  • Built to strict quality control standards
  • Fits models that have a Key Hole in the Door Handle

This handle makes a great replacement and has good cost savings over a dealer handle!

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Part Details

  • Front or Rear Location: Front
  • Color: Black
  • Finish: Smooth - Paint to Match

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:26)
    • Remove the T20 Torx screws securing the door panel
    • Pry up the panel in the door pull to expose the bolts underneath.
    • Use your flat blade screwdriver to pry up the bezel around the door latch.
    • Unplug the wiring harness from the lock switch.
    • Uninstall the door latch and disconnect it from the door latch rod.
    • Remove the door panel.
    • Remove the insulator and water shield
  2. step : Remove the door handle (3:52)
    • Unbolt the outside door handle and remove the door handle.
  3. step : install the door handle (4:26)
    • Clip the door handle back in.
    • Bolt the door handle back into place.
  4. step : Put the door panel back on (5:21)
    • Put the water shield and foam insulation back on
    • Replace the door panel, threading through the wiring for the lock switch.
    • Secure into place with T20 Torx screws.
    • Install the door latch, clip in the door latch rod and clip it into place.
    • Plug in the wiring harness to the latch bezel and snap it into place.
    • Replace the remaining screws and snap the door pull panel back together.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2007Ford Focus Ford Focus Smooth - Paint to Match Black Exterior Door Handle Front Driver Side
2000-2007Ford Focus Ford Focus Smooth - Paint to Match Black Exterior Door Handle with Lock Provision Front Passenger Side
2001-2006Mazda Tribute Mazda Tribute Smooth - Paint to Match Black Exterior Door Handle Front Driver Side
2001-2006Mazda Tribute Mazda Tribute Smooth - Paint to Match Black Exterior Door Handle with Lock Provision Front Passenger Side

This part replaces:

  • OE # 2T2Z7822404BAPTM
  • Dorman 80256
Part #: 1ADHE00476


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:57 min)