This tie rod is just what you need to ensure the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits the LH (Driver Side) FRONT
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4WD (Four Wheel Drive) Models only

NOTE For 1987 Models: 1st Design has 22mm Diameter threads. This 2nd Design 1" x 18mm threaded tie rod end replaces the entire 1st Design as an assembly.

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1987 Ford F350 Truck 4 Wheel Drive Front Inner 1 Inch x 18 Thread To Pitman Arm Tie Rod Driver Side 2nd Design
  • 1987 Ford F350 Truck 4 Wheel Drive Front Outer 1 Inch x 18 Thread Tie Rod Steering Arm To Steering Arm Driver Side 2nd Design
  • 1988-1997 Ford F350 Truck 4 Wheel Drive Front Inner To Pitman Arm Tie Rod Driver Side
  • 1988-1997 Ford F350 Truck 4 Wheel Drive Front Outer Tie Rod Steering Arm To Steering Arm Driver Side

This part replaces:

  • OE # E7TZ3304B
  • Moog ES3009R
Part #: 1ASTE00560


Order must be placed by 4pm ET