Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Your sway bar helps your vehicle's suspension performance. The main purpose is to reduce body roll when going through a turn at speed. Although the sway bar itself is not a wearable item, the end links & frame bushings are.

Specifications:

  • Fits either the LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 4L3Z5K483BA, 4L3Z 5K483 BA
  • Direct replacement
  • Built to strict quality control standards

If you can hear your sway bar rattling on a bumpy road it may be time to replace the end links. This link makes a great replacement and offers good cost savings over the dealer part.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:40)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:15)
    • Apply rust penetrant to the sway bar link nuts
    • Remove the top sway bar link nut with a 21mm socket and ratchet
    • Remove the lower sway bar link nut with an 18mm socket and ratchet
    • If the nut spins, hold the nut with an 18mm wrench and loosen the stud with an 8mm socket and ratchet
    • Remove the 12mm bolts from the axle
    • Push the axle to the side
    • Pull out the sway bar link
  3. step : Installing the Sway Bar Link (2:43)
    • Put the sway bar link into place
    • Fasten the 21mm nut onto the top of the sway bar link
    • Put the axle into place
    • Insert the 12mm bolts into the axle
    • Tighten the 12mm bolts to 60 foot-pounds of torque in a crossing or star pattern
    • Fasten the 18mm nut onto the bottom of the sway bar link
  4. step : Reattaching the Wheel (4:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 120 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Sockets - Metric

  • 21mm Socket
  • 8mm Socket
  • 10mm Socket
  • 12mm 12-Point Socket

  • Wrenches - Metric

  • 21mm wrench
  • 18mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004Ford F150 Truck Ford F150 Truck New Body Style 4 Wheel Drive Front Sway Bar Link Driver or Passenger Side
2005Ford F150 Truck Ford F150 Truck 4 Wheel Drive (Built Before 11/29/04 Production Date) Front Sway Bar Link Driver or Passenger Side
Part #: 1ASSL00254


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(04:56 min)