Replaces
This part doesn’t fit a . Select from parts that fit.
1A Auto Lifetime Warranty
Frequently bought together
Part Details
Our direct fit gas-charged strut assemblies help to restore your vehicle’s handling and ride quality to just like new.
Our direct fit gas-charged shock absorbers help restore your vehicle's handling and ride quality to just like new.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear shocks on this 2005 Ford F150 and we show you on the passenger side, but the driver side is the same procedure. We recommend that if you replace one of them, you replace the other one. The items you'll need for this are new rear shocks from 1AAuto.com and a 15 millimeter socket and ratchet and 18 millimeter wrench.
For these shocks, you actually don't even need to put your vehicle up in the air. You've got 15 millimeter bolts going into 18 millimeter nuts, same thing on the top and on the bottom. I've got my 18 millimeter wrench on there, I'm going to use another wrench, and hook it on for some extra leverage.
If you're working with the vehicle on the ground, you obviously don't need a jack under here, but, if you're working with the vehicle up in the air, you want to take your jack and just get it, because the shocks are actually holding the rear end up. You just take a little bit of pressure off the shocks. Now at this point, if your vehicle's on the ground, you want to be careful, because when you remove this if your shock is still pressurized it's going to want to push down. You saw it push down a little bit there. I just kept this nut on just for safety. Remove the nut from up there. Remove that bolt. Bring the shock down.
To reinstall is the reverse. Make sure you put the shock behind your emergency brake cable. You'll have to push up. Again, if your vehicle's on the ground, you're going to have to push up more. Push the shock up. Put the bolt through. Replace the nut at the top of the shock. If you had your vehicle lifted, you can remove this jack. We'll fast forward as Mike tightens the top and bottom bolts on the shock, just preliminarily for right now. Now, just make sure that the weight's back on your shocks entirely. Then, tighten them up the rest of the way as tight as you can get them with the wrenches. Then you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
