Replaces

Ford F150 Lincoln Mark LT Front Wheel Bearing & Hub Assembly Pair TRQ - 1ASHS00351

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Tapered Roller Bearing
  • Quantity:   Pair

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 4 Bolt Rectangular Flanges
  • Fit 6 Lug Wheels
  • Replaces dealer part number: 7L3Z-1104-A, 7L3Z1104A
  • Have ABS (Anti Lock Brakes) sensors already installed
  • Direct replacements
  • Built to strict quality control standards
  • Fit 4WD (Four Wheel Drive) Models only

Note: For 2005 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:42)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Remove the hub cap with pliers
    • Loosen the 13mm nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:32)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:32)
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Thread a nut onto the rotor
    • Hit the rotor with a hammer
    • Pull the rotor off
  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness sensor
    • Remove the ABS from the harness on the bracket
    • Remove the four 18mm bolts from the hub
    • Remove the 13mm hub nut, making sure you can push the nut in and out
    • Twist in an 18mm bolt to the hub
    • Remove the hub
  5. step : Installing the Hub (4:42)
    • Grease the set of bearings inside the new hub with bearing grease
    • Apply a light coat of bearing grease to the engaging wheel for the 4WD
    • Insert the hub into place
    • Tighten the 18mm bolts to the hub
    • Tighten the 18mm bolts to 95 foot-pounds of torque
    • Replace and tighten the 13mm hub nut
    • Tighten the 13mm bolt to 20 foot-pounds of torque
    • Push the ABS wire into its respective brackets
    • Replace the hub cap
  6. step : Installing the New Brake Rotor (6:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Adjust the emergency brake, if necessary
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 95 foot-pounds of torque
  7. step : Installing the New Brake Pads (7:24)
    • Put the caliper on
    • Thread the 13mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the lug nut from the rotor
  8. step : Reattaching the Wheel (8:55)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Connect the ABS sensor
  9. step : Testing the Brakes (9:42)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 21mm Socket
  • 18mm Socket

4.69/ 5.0
26 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
19
6
1
0
0
So far so good
Parts shipped as expected. Easy installation. Online installation ready helped to ensure I had all the right tools before starting the project. The parts mounted and connected as designed. So far, my truck runs smooth. Time will try if quality is as good as the really more expensive ones.
February 3, 2017
Wheel bearing
I had a wheel bearing fit perfect. I had no trouble with the assembly, or shipping. This is a review from a guy who likes to save money and do things himself.
February 23, 2017
Simple, Fast and Very Satisfied
Ordering was very Simple and easy to complete. Shipping was Fast with my parts arriving in only a few days. The parts were an exact fit, making the entire process Very Satisfying.
May 15, 2017
F150 front hub
Shipped fast, part fit great, well worth it, will definitely buy from 1a auto again
June 21, 2017
07 F150 wheel bearings (front)
Great price & great video for a do it yourself person like me. Had no trouble replacing them after watch the video. Definitely will order more parts from them in the future
July 30, 2017
2008 F150 hub assembly
Hubs arrived quickly. Replacements from 1A matched OEMs perfectly and went on without an issue. How-to Video from 1A made the job easy. Thanks to 1A I saved over $500 in parts and labor.
August 2, 2017
Great Stuff
Perfect fit. Arrived in three days with free shipping. And got two for $10 more than my LPS wanted for one! After reading the crappy reviews about the Duralast brand (AutoZone), I decided to take a chance with 1A Auto. Very happy, and will definitely be back!
September 23, 2017
So far so good
I bought these bearings, as well as 4WD vacuum actuators, for an 07 Ford f150. Installation went very smooth. My only complaint is that 1A Auto does not include the hardware needed for installation. I had to use the old bolts and nuts, which isnt necessarily a bad thing but I would have preferred to replace everything with new parts. It has only been two weeks since installation and things seem great. I will update after some time has passed.
January 30, 2018
2008 Ford F-150 4x4 front wheel hubs
It was a perfect fit and the video installation was a great help!!
March 30, 2018
Good Serivice
Very happy with your Services and Prompt Shipment, the Part went on perfectly no problems at all very satisfied thank you, I will continue getting parts from you and again thank you.
April 2, 2018
Seems alright
Parts case pretty well packaged. Had no issues putting the new hubs on. Fitment was spot on, it’s a cheap hub though so don’t expect a forever bearing.
April 9, 2018
Wheel bearing hub assembly
Product came quickly, seems well made. Fit perfectly. As I have just installed not able to say how it will hold up long term but so far in 200 miles bearing system works good. Lines for anti lock brakes were perfect in layout and clip on. At this point I would recommend, for the price cant be beat
October 16, 2018
Perfect product and instructions
Everything I order from y’all is top shelf and theses hubs and bearings were no ex exception. Y’all always ship super fast. UPS damaged this order And lost one of the hubs and y’all replaced the complete order instantly. I didn’t have to deal with ups at all. Parts went on perfectly thanks to y’all online video. Thanks again. Parker
October 27, 2018
Wheel bearings.
I love these prices and products. Top quality and easy to install. Arrived sooner then expected. Thx.
November 11, 2018
Great Product
The hub assemblies I ordered were exact fit, direct replacements as advertised. Shipping took a little longer than expected, but overall Im satisfied. Ive only had them on for a couple weeks so dont know exactly how long theyll last but with a lifetime warranty Im not worried. Thanks again!
January 11, 2019
Quality
I received this part very quick. Also I am impressed with the quality and packaging of this item.
February 25, 2019
new hub bearings
i have bought complete suspension setups for my f150 in the past and figured since everything was a perfect fit lets give them a try getting parts for my jeep wrangler again perfect fit thumbs up to you guys
March 2, 2019
One hub was worthless
I ordered to the two hub assemblies, and when I opened the boxes, one of them had a cut chord making it useless
March 24, 2019
2008 F250 front hub assy
Parts were delivered on time and were perfect fit and correct.
April 6, 2019
2005 Fhub bearing
Just replaced both front hub bearings with 1aauto bearings a few weeks ago. No problems with the fit and the product appears to be of good quality. So far less than 100 miles and no issues. I would recommend these bearings as the price is right and for the quality you cant go wrong. I only gage this review 4 stars due to the low miles I have driven on the bearings so far.
April 8, 2019
Quality parts for the best price
These hub assemblies were very easy to install. They were 100% a perfect fit for my truck. I really like 1A Auto quality, and I will be ordering from them again in the future.
April 19, 2019
Work out perfectly for me
They were cheaper in price than buying at local parts store. Installed them like their video showed how to and Im completely satisfied with them.
June 27, 2019
Great service speedy delivery
Got exactly what i ordered exactly as described quality parts thank you !!!!
July 5, 2019
Good parts
They were as advertised got the truck back on the road
July 22, 2019
Lincoln fron wheel bearing hubs
These fit perfectly and the video was very helpful. I will be using this company again.
October 1, 2019
Hubs
Finally after the second try I got the correct Hubs. Can I send the first set back I received and I ordered set tie rods apparently my phone ordered 2 sets can I send one of those back as well as but over all Im really please with my purchases and prices are great thankyou number is Scott Dobson 740 502 2483 Fresno Ohio
October 13, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Would I need to purchase the break rotors separate?
Ethan R March 2, 2016
The rotors are not included. What you see is what you get.
Phillip C March 2, 2016
Rotors are sold separately and are not included in this kit.
Brian F March 2, 2016
The brake rotor is separate from the wheel hub assembly. It would have to be purchased separately.
Michael V March 2, 2016
Yes you would need to purchase the break rotors seperate.
Joshua M March 2, 2016
Does it come with locking assembly?
James S April 10, 2017
Not exactly sure what you mean, but you get exactly what is in the picture, everything else is reused.
Philip R April 11, 2017
You will need to reuse the manual locking hub, or the auto locking hub and actuators. This is just going to be the wheel hub and bearing.
Alex P April 11, 2017
Year Make Model Description
2005Ford F150 Truck Ford F150 Truck 4 Wheel Drive (Built After 11/28/04 Production Date) with 6 Lug Wheels Front Wheel Bearing & Hub Assembly Pair
2006-2008Ford F150 Truck Ford F150 Truck 4 Wheel Drive with 6 Lug Wheels Front Wheel Bearing & Hub Assembly Pair
2006-2008Lincoln Mark LT Lincoln Mark LT 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair
Part 1ASHS00351
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA53492