Replaces

Ford F150 F150 Heritage Front CV Axle Shaft with Hub Assemblies 4 Piece Set TRQ - 1AAHK00004

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:   with Hub Assemblies
  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Tapered Roller Bearing
  • Quantity:   4 Piece Set

 

CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems.  If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Remove the wheel (1:03)
    • Remove the lug cap
    • Loosen the lug nuts.
    • Remove the cover and cotter pin from the hub nut and loosen the hub nut.
    • Loosen the seven 13 mm 12 point bolts securing the axle to the front drive.
  2. step : Disconnect the stabilizer link (1:55)
    • Hit them with penetrating oil
    • Use a 14 mm socket and 9/16 socket on the bottom to remove the stabilizer link.
    • This might take a bit of elbow grease with hand tools, but it will come loose.
    • Use a hammer to drive out the stabilizer link.
  3. step : Remove the half shaft of the CV axle. (3:38)
    • Use a large crow bar between the lug bolts to secure the axle while you remove the 13 mm 12 point bolts if you didn't loosen them earlier.
    • Remove the hub nut.
    • Give the axle a good tap with the hammer to break it loose from the steering knuckle.
    • Pull the axle out.
  4. step : Install the new half shaft of the CV axle (5:23)
    • Install the grease fitting on the ball joint and fill with grease.
    • Put the new axle in and bolt in.
    • In a star pattern, torque the 13 mm 12 point bolts to 60 ft lbs.
  5. step : Install the new stabilizer link. (6:20)
    • Thread the bushings and washers on the stabilizer bar and tighten the lock nuts down.
    • Jack up the suspension a bit and tighten the stabilizer link up to 15-17 ft lbs.
  6. step : Put your hub and lug nuts and wheel back on. (7:20)
    • Put the hub nut on and pre-tighten but don't torque it.
    • Put the wheel and lug nuts back on
    • Lower the vehicle and torque the lug nuts in a star pattern to 100 ft lbs.
    • Torque the hub nut to 220 ft lbs.
    • Replace the cotter pin and cover on the hub nut.
    • Put the lug cover back on.

Tools needed for replacement:

    General Tools

  • Center Punch
  • Jack Stands
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 14mm Socket
  • 19mm Socket
  • 35mm Socket

  • Sockets - SAE

  • 9/16 Inch Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Parts for front acels&hbs
There was zero auto repair shop within 100 miles of my home who could match the warranty I was give at1aauto.com. Will buy all the suspension plus shocks and will be turn my back on the shop I used for last ten years for them not even considering looking at what 1aauto.com had to offer.
October 17, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004Ford F150 Heritage Truck Ford F150 Heritage Truck 4 Wheel Drive with 4 Wheel ABS Brakes with 5 Lug Wheels Front CV Axle Shaft with Hub Assemblies 4 Piece Set
2000Ford F150 Truck Ford F150 Truck 4 Wheel Drive with 14mm Wheel Stud Size with 4 Wheel ABS Brakes with 5 Lug Wheels Front CV Axle Shaft with Hub Assemblies 4 Piece Set
2001-2003Ford F150 Truck Ford F150 Truck 4 Wheel Drive with 4 Wheel ABS Brakes with 5 Lug Wheels Front CV Axle Shaft with Hub Assemblies 4 Piece Set
Part 1AAHK00004
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: BHA52924