1ASFK03752-Ford Explorer Mercury Mountaineer Steering & Suspension Kit 10 Piece Set

Replaces

2004 Mercury Mountaineer V8 4.6L Steering & Suspension Kit 10 Piece Set

1ASFK03752-1077462-2004
Guaranteed to fit: 2004 Mercury Mountaineer

Fit Details

  • Engine Displacement (Metric): V8 4.6L

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Kit Includes: (2) Front Sway Bar Links
  • Quantity: 10 Piece Set
  • Kit Includes: (2) Front Upper Ball Joints
  • Kit Includes: (2) Front Inner Tie Rods

This part replaces:

  • Moog K8694T, K80771
  • Moog ES3461
  • Moog K7275
  • Moog EV422
  • Moog K80008
  • Hollander 2610-326592
  • OE # 1L2Z3084AA
  • OE # 1L2Z3085AA
  • OE # 1L2Z3280DA
FREE SAME DAY SHIPPING
Save 29%
List: $105.95 Save: $31.00
Part 1ASFK03752
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA59386

Frequently bought together

Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Upper Ball Joints
      (2) Front Inner Tie Rods

Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and set the wheel aside.
    • Put the wheel under the vehicle for added security in the event of a jack failure.
  2. step : Remove the brakes (2:00)
    • Remove the 13 mm sockets anchoring the caliper.
    • Wire tie the caliper up out of the way.
    • Use a 15mm socket to remove the caliper bracket
    • Remove the rotor
    • Remove the dust shield with your 8 mm socket and ratchet
  3. step : Remove the outer tie rod (3:00)
    • Use your pliers to remove the cotter pin from the tie rod
    • Remove the nut with your 21 mm socket and ratchet
    • Pull apart the tie rod with a tie rod puller.
    • Use a paint marker to mark where the top nut on the tie rod is.
    • Use two adjustable wrenches to remove the tie rod.
  4. step : Install the new tie rod (6:15)
    • Apply a little loctite to the inner tie rod
    • Screw on the outer tie rod to the inner tie rod up to your paint marker mark.
    • Fill the dust boot with grease
    • Reassemble the tie rod end, replacing the nut and cotter pin.
    • Reassemble the brakes and wheel.
    • See our other videos for more detailed instructions.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Liquid Thread Locker
  • Marker / Writing Utensil
  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers
  • Lug Wrench
  • Wire Cutters

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 8mm Socket
  • 15mm Socket
  • 21mm Socket

  • Specialty Tools

  • Tie Rod Puller

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2002-2003Ford Explorer Ford Explorer 4 Door V8 4.6L Steering & Suspension Kit 10 Piece Set
2004-2005Ford Explorer Ford Explorer V8 4.6L Steering & Suspension Kit 10 Piece Set
2002-2005Mercury Mountaineer Mercury Mountaineer V8 4.6L Steering & Suspension Kit 10 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS00100
DIY Solutions SUS00153
DIY Solutions SUS07581
DIY Solutions SUS07319
DIY Solutions SUS06607
Ford F87Z3A130BA
MOOG K8695T
MOOG K7275
MOOG EV422
MOOG K80771
MOOG K8694
MOOG K80008
MOOG ES3461
MOOG Chassis Products K7275
MOOG Chassis Products K8694
MOOG Chassis Products K80771
MOOG Chassis Products K8695T
MOOG Chassis Products EV422
MOOG Chassis Products ES3461
MOOG Chassis Products K80008

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA59386
Product Reviews
5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Well packaged and ready to go
I ordered this suspension kit and it was here in a couple of days. The kit had everything ready to go. I would buy from A1 Auto again. Thank you.
January 27, 2017
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Mercury is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Mercury or Ford Motor Company. See all trademarks.

Ford Explorer Mercury Mountaineer Steering & Suspension Kit 10 Piece Set TRQ PSA59386-1ASFK03752 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a 2004 Mercury Mountaineer with these options.