Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

This replacement Tail light is just what you need to get your vehicle in good looking form again!

This tail lamp features the following specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver) and RH (Passenger) Sides
  • Replaces dealer part numbers: F8CZ 13405 DA, F8CZ13405DA, F8CZ 13404 DA, F8CZ13404DA
  • Includes lens & Housing
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Fits 2 Door coupe models only

*Note: For 1998 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

This tail light makes a great replacement and has good cost savings over a dealer unit.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Taillight Assembly (0:33)
    • Remove the two 7mm screws to the side of the taillight assembly.
    • Pry the light out and off.
    • Disconnect the harnesses.
  2. step : Replacing a Bulb (1:02)
    • Twist the socket off and pull the bulb straight out.
    • Push a new bulb into place and twist the socket back into the taillight.
  3. step : Replacing the Taillight Assembly (1:54)
    • Pry out any clips left behind in the car.
    • Take the sockets from the old taillight and twist them into your new taillight assembly.
    • Reconnect the harnesses.
    • Line up the outside pin and push the taillight back into place.
    • Replace the two 7mm bolts.

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1998Ford Escort Ford Escort 2 Door Coupe ZX2 Tail Light Pair (Built After 10/29/97 Production Date)
1999-2002Ford Escort Ford Escort 2 Door Coupe ZX2 Tail Light Pair
2003Ford Escort Ford Escort Tail Light Pair
Only 2 left in stock
Part #: 1ALTP00483

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(03:42 min)