Specifications

  • Right Hand (Passenger Side)
  • Replaces dealer part numbers: F8CZ 13008 AA, XS4Z 13008 CA
  • Includes lens & housing
  • Bulbs not included
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Changing the Bulbs (0:48)
    • Twist the cover off on the back of the headlight.
    • Remove the ring,
    • Twist the socket out and change the bulb.
    • Reverse procedure.
    • Twist the blinker bulb out and replace the bulb.
    • Twist it back into place.
    • Twist the socket to remove the bulb on the back of the parking light.
    • Bull the bulb straight out to replace.
    • Line the tabs up on the socket and twist it into place.
  2. step : Removing the Bumper Cover (2:29)
    • Remove the two Phillips screws in the wheel well.
    • Remove the 10mm bolt in the wheel well.
    • Remove the 10mm bolts behind the inner fender panel.
    • Remove the four 8mm or Phillips screws under the bumper cover.
    • Pull the bumper cover off.
  3. step : Removing the Headlight Assembly (4:28)
    • Remove the four 10mm fasteners from the headlight.
    • Pull the headlight out.
    • Disconnect the two connectors.
  4. step : Replacing the Headlight Assembly (5:12)
    • Replace the two connectors.
    • Line the headlight assembly up and push it into place.
    • Replace the four 10mm fasteners.
    • Adjust the headlight angles with the adjuster rods on the back.
    • Put the bumper cover up into place.
    • Replace the three 10mm bolts at the top of the bumper cover.
    • Replace the two 10mm bolts behind the inner fender.
    • Replace the bolts in the bumper cover.
    • Plug the lights in.
    • Replace the bolts under the bumper cover.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Satisfied
Received as advised fit vehicle perfectly Thanks in advance.
February 28, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1998-2002Ford Escort Ford Escort ZX2 Coupe Headlight Passenger Side
2003Ford ZX2 Ford ZX2 Headlight Passenger Side

This part replaces:

  • Hollander 114-00519R
  • TYC 20-6933-00
  • DEPO 330-1117R-AS
  • OE # XS4Z 13008 CA
  • OE # F8CZ 13008 AA
Part #: 1ALHL01172


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:46 min)