Ford Escort Mercury Tracer Wheel Bearing & Hub Assembly - 1ASHR00011


  • Fits either the LH (Driver Side) or RH (Passenger Side) REAR
  • Direct replacement
  • replaces Ford Part #F1CZ-1104A
  • Built to strict quality control standards



  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.


  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA54163 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (0:47)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Drum (1:07)
    • Remove the two Phillips head screws from the brake drum with an impact screwdriver and a hammer
    • Apply rust penetrant to the wheel studs
    • Strike the drum with a hammer to loosen it
    • Tighten an M12 bolt into the drum to pull it off
    • Strike the drum with a hammer to loosen it
    • Pull off the drum
  3. step : Removing the Hub (2:37)
    • Remove the hub nut cap with a hammer and flat blade screwdriver
    • Remove the 32mm hub nut
    • Pull off the hub
  4. step : Installing the Hub (3:47)
    • Put the new hub into place
    • Start the hub nut by hand
    • Tighten the hub nut to 152 foot-pounds of torque
  5. step : Installing the Brake Drum (4:48)
    • Slide on the brake drum
    • Tap the drum into place with a hammer
    • Insert the two Phillips screws into the brake drum
    • Tap on the hub nut cap with a hammer
  6. step : Reattaching the Wheel (6:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Center Punch
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1991-1993 Ford Escort Wheel Bearing & Hub Assembly Rear
  • 1994-1996 Ford Escort without ABS Brakes Wheel Bearing & Hub Assembly Rear
  • 1997-2002 Ford Escort without ABS Brakes Wheel Bearing & Hub Assembly Rear for Models with Rear Drum Brakes
  • 1991-1993 Mercury Tracer Wheel Bearing & Hub Assembly Rear
  • 1994-1996 Mercury Tracer without ABS Brakes Wheel Bearing & Hub Assembly Rear
  • 1997-1999 Mercury Tracer without ABS Brakes Wheel Bearing & Hub Assembly Rear for Models with Rear Drum Brakes

This part replaces:

  • Hollander 538-01261
  • OE # F1CZ1104A
Part #: 1ASHR00011

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(06:35 min)