Replaces

Ford Escape Mercury Mariner Window Regulator Driver Side Rear - 1AWRG01570

This replacement window regulator with motor is just what you need to get your vehicle in good shape again!

Specifications:

  • LH (Driver Side) REAR
  • Includes the power window motor
  • Replaces dealer part number: 6L8Z-7827001-BA, 6L8Z7827001BA
  • Power operation
  • Direct replacement
  • Built to strict quality control standards

This window regulator with motor makes a great replacement and has good cost savings over a dealer unit.

Installation:

  • This repair is easier than you may think. You'll find our installation tips helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle, if this Window regulator does not fit the application stated.
    • You can use your existing hardware and wiring harnesses. This Regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure the cables and all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.
  • Nothing is more frustrating than taking your car apart and finding the part you purchased does not fit. You want the part to fit. This design is test fit on an actual door. When you install it you will have no issues.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.

Please Note: This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original.  It has been subjected to extensive testing and quality control standards.  That is why we offer this regulator with our superior warranty!

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:45)
    • Remove the Phillips head screw from inside the door pull
    • Pry off the screw cover inside the door handle with a flat blade screwdriver
    • Remove the Phillips head screw from inside the door handle
    • Pull off the door handle bezel by hand
    • Pull off the window trim piece by hand
    • Pry out the door panel by hand
    • Disconnect the window switch wiring harness
    • Remove the Phillips screw from the door panel bracket
    • Carefully peel back the water shield
  2. step : Removing the Window Regulator (2:49)
    • Lower the window by hand
    • Remove the two 10mm bolts from the window track
    • Pull off the window weather strip
    • Raise the window by hand
    • Hold the window in place with painter’s tape
    • Remove the two 10mm nuts from the regulator rail
    • Remove the three 10mm bolts from the window motor
    • Disconnect the window motor wiring harness
    • Pull the regulator out of the door
  3. step : Installing the New Window Regulator (4:29)
    • Maneuver the new window regulator into the door
    • Hang the regulator by its studs
    • Start the three 10mm bolts into the window motor by hand
    • Start the two 10mm nuts onto the regulator
    • Tighten all the regulator nuts and bolts
    • Connect the window motor wiring harness
    • Remove the painter’s tape from the window
    • Lower the window onto its track
    • Insert the bolts into the window track
    • Connect the power window switch to its wiring harness
    • Turn the vehicle’s ignition on
    • Test the window with the switch
    • Turn the ignition off
    • Disconnect the window switch wiring harness
  4. step : Reinstalling the Door Panel (7:04)
    • Push the water shield into place
    • Put the door panel bracket into place
    • Insert the Phillips screw into the door panel bracket
    • Connect the window switch wiring harness
    • Lift the door panel into place
    • Push the door panel clips in
    • Insert the Phillips screw into the door pull
    • Put the door handle bezel on by hand
    • Insert the Phillips screw into the door handle
    • Push on the window trim piece

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
1
0
0
0
Outstanding Customer Support on return/re-order
I would like to take time to write to you to say how much I appreciate your company from the initial order to where I found an outstanding video explaining how to remove and replace the part I need to getting the part in only 2 days from ordering. I made a mistake and ordered the driver side part when I needed the passenger side part and when I called in on a SUNDAY I was not only surprised that you were open but even more surprised at the OUTSTANDING customer support I received from Alexandria. She helped me with the RMA and re--ordering the part that I needed. Thank you for restoring my faith in good companies who actually have Great quality customer support like our country should have .

Thank you, I have found my new goto auto part supply company and will tell my friends about you.
Mark Fullmer

Hello Mark,
I will be happy to take your order back for a refund. There will be NO restocking fee. Please follow these instructions:
1. Write your RMA# (see below) and your complete name and return address on the package.
2. Include a copy of this email in the box.
3. Ship your return to the address below:
RMA#: RMA1049663
1A Auto
1 Distribution Center Circle
Suite 400
Littleton, MA 01460
*NOTE* Please mail in your return. We are unable to facilitate walk-in returns.
If the item is valued at $50.00 or more, we recommend purchasing shipping insurance.
Correctly performing the steps above will assist us in processing your return.
Please return this item within the next 60 days.
Please don’t hesitate to write back if you have any questions.
Your Reference ID #: ORD3081799

Thank you,
Alexandria

1A Auto
Visit us at: www.1AAuto.com
Order Line 888-844-3393
March 20, 2017
Purchased
11 months ago
Easy to install!
We actually have a 2006 Ford Escape. The replacement was very easy to install. Your video was easy to follow. The only thing was that I had to go to the auto store for nuts which were less than $5.
June 24, 2017
Purchased
10 months ago
Easy Install except for one thing
The part works great and is an easy install but for the fact that on the original part there are some fasteners that are bolts that screw into thread holes on the part while on the replacement part the same connection is via a bolt stud on the part that must be fastened with a nut. Long story short, you need to buy three 6mm nuts to complete the install.
August 24, 2017
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(08:32 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • Hollander 135-01846L
  • OE # 6L8Z7827001BA
  • Dorman 748-617

Vehicle Fit

  • 2001-2007 Ford Escape Power Window Regulator with Motor Rear Driver Side (High Quality)
  • 2005-2007 Mercury Mariner Power Window Regulator with Motor Rear Driver Side (High Quality)
Part #: 1AWRG01570

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More