Replaces

Ford Escape Mercury Mariner Window Regulator - 1AWRG00913

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   with Motor
  • Operation:   Power

Specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part numbers: 2L8Z7823201BA, 2L8Z 7823201 BA
  • Power operation
  • Direct replacement
  • Includes power window motor
  • Built to strict quality control standards

 

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:44)
    • Pry off the trim piece inside the door handle with a flat blade screwdriver
    • Remove the two Phillips screws at the bottom of the door panel
    • Remove the Phillips head screw inside the door handle
    • Remove the Phillips head screw inside the door pull
    • Remove the door handle bezel
    • Lift the door panel up and off
    • Remove the wiring harness from the switch panel
    • Remove the Phillips screw from the bracket on the door
    • Carefully peel off the water shield
  2. step : Removing the Window Regulator (2:40)
    • Loosen the two 10mm bolts that hold the window to the regulator
    • Raise the window by hand
    • Pull the window out back first
    • Disconnect the window motor lead
    • Remove the three 10mm bolts from the motor
    • Remove the two 10mm nuts from the regulator
    • Pinch the tab and remove clip on the wiring harness
    • Pull the window regulator out through the door
  3. step : Installing the New Window Regulator (5:05)
    • Remove the three nuts from the new motor
    • Push the regulator into the door
    • Thread the three 10mm nuts into the motor
    • Reconnect the window motor lead
    • Place the two nuts on the regulator rails and tighten them
    • Lower the window, place the front into the track, then the rear
    • Slide the window onto the clips in the regulator
    • Tighten the two 10mm bolts that hold the window to the regulator
    • Test the regulator by connect the window switch wiring to the switch panel
  4. step : Reinstalling the Door Panel (8:37)
    • Put the water shield into place
    • Connect the wiring harness to the switch panel
    • Push in the door panel clips
    • Connect the door handle bezel
    • Tighten the Phillips head screw inside the door pull (larger screw)
    • Tighten the Phillips head screw inside the door handle (natural color)
    • Tighten the two Phillips screws at the bottom of the door panel (Skinnier in back, larger in front)
    • Attach the trim piece inside the door handle

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Awesome service and delivery
Honestly, I saw the video for a 2007 Ford Escape and have total confidence that when I need to replace the window mechanism, Ill know how. But the thing started working again, so I lubricated the channels and will keep the part in case it stops working. Great company.
January 24, 2017
2005 Ford Escape Driver Side Window Regulator Assembly
Ordering on-line was very easy. Part came in before due date, part could have been packaged better to prevent breaking or bending. The part was pretty easy to install after watching the 1A Auto video. Part installed and tested in about 3 hours. Worst part was removing all the tape residue, tape was used to hold the window up and keep rain water out while waiting for part to be delivered. Highly recommend 1A Auto Parts.
August 28, 2017
Worked perfectly--easy to install
Part arrived within 3 of ordering. You Tube video was very helpful. Installation was a piece of cake. Highly recommended!
September 22, 2017
Wouldn’t go anywhere else
When an obscure piece brakes and it might cost hundreds of dollars at a dealership, obviously that’s not fun. 1AAuto had the piece I needed at a great price but also had the video expertise I needed to install it myself. I will not spend my money anywhere else if I need any other parts for my car.
June 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001-2007Ford Escape Ford Escape Front Power Window Regulator with Motor Driver Side
2005-2007Mercury Mariner Mercury Mariner Front Power Window Regulator with Motor Driver Side
Part #: 1AWRG00913


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:14 min)