Ford Door Handle Latch Cable - 1ADMX00062

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

This replacement Ford truck door handle cable is just what you need to get your vehicle in good working form again!


  • Fits Driver or Passenger side Front door
  • Reinforced from the original design for better durability
  • Direct replacement for original cable

This part is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Window Crank Handle (1:00)
    • Pull up the window crank handle cover
    • Remove the T20 Torx screw from the crank handle
    • Pull off the crank handle
  2. step : Removing the Door Panel (1:39)
    • Remove the Phillips head screw at the top front corner of the door panel
    • Remove the Phillips screw inside the door pull
    • Pry off the door panel with a door panel clip tool or a putty knife
    • Pull the door panel up and off
    • Peel back the water shield
  3. step : Removing the Lock Cylinder (2:42)
    • Pry the latch cable out of the door handle with a flat blade screwdriver
    • Remove the 11mm bolt from the window track
    • Pull the window track forward
    • Remove the lock rod from the plastic clip
    • Pry out the door latch clip with a flat blade screwdriver
    • Pull out the lock cylinder from the outside of the door
    • Twist the lock cylinder off the lock rod
  4. step : Removing the Latch Mechanism (4:42)
    • Remove the three Phillips screws from the latch mechanism
    • Pull the latch mechanism out of the door, taking its three rods with it
  5. step : Disconnecting the Latch Cable (6:12)
    • Pull off the plastic latch cable covering
    • Pull the latch cable out of the latch mechanism
  6. step : Installing the New Latch Cable (7:34)
    • Pull the latch mechanism lever back
    • Twist the new latch cable into the latch mechanism
    • Push on the plastic latch cable housing
    • Make sure the lock rod is positioned alongside the latch mechanism
  7. step : Reinstalling the Latch Mechanism (9:10)
    • Push the latch mechanism into the door, hold the rods in place
    • Push the latch mechanism into place
    • Push the lock button into place
    • Start the three Phillips screws into the latch mechanism
    • Connect the latch cable to the door handle
    • Clip the lock rod into place
  8. step : Reinstalling the Lock Cylinder (11:13)
    • Push the lock cylinder into place
    • Push in the lock cylinder clip
    • Connect the lock rod to the lock cylinder
    • Tighten the three Phillips screws into the latch mechanism
    • Slide the window track into place
    • Insert the 11mm bolt into the window track
  9. step : Reinstalling the Door Panel (12:03)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips screw at the top front corner of the door panel
    • Insert the Phillips screw into the door pull
  10. step : Reinstalling the Window Crank Handle (13:10)
    • Put on the crank handle washer
    • Push on the crank handle
    • Insert the T20 screw into the crank handle
    • Push on the crank handle cover

Tools needed for replacement:

    General Tools

  • Putty Knife
  • Flashlight

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 11mm Wrench

4.67/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1997 Ford door latch cable
The cable was fine and fit as advertised. I got some good advice on getting to it from the video but if you have power door locks it says you may have to undo some wiring but it is more involved than that. The servo has to come out and it is a chore to do so as well as get it back in place.
January 24, 2017
No instructions
I was a little disappointed that there were no instructions, especially when you have electronic door locks. What could have been easier with a little help, was a lot of frustration. Your video on how to install the cable on a truck without electronic door locks was wonderful, but when there are two options there should be two videos. Nothing is easy. Drilling out a factory installed giant rivet, with no way to reinstall a giant rivet. A part to reattach the electronic door lock, should be offered with the cable. A part needed, but not offered, more frustration. I understand you are trying to help with your videos, and that is why I ordered the part from you, to support you web sight. Thanks for trying to help us all. Thank you John
March 3, 2017
Great Price
This was the best price I found anywhere, Exact fit. Works exactly as original. This requires a little knowledge to replace but it can be done took 1 hour per door.
August 28, 2017
Works Great
Cable works great. Exactly what I ordered. Will buy from again.
December 31, 2017
I bought a cable from another company first, it was the wrong cable. I purchased the cable from 1A Auto it was the correct cable and it works fine.
April 15, 2018
1A Auto
There really is no place else you have to go to get your car parts. Between very understandable youtube videos, to prompt delivery of parts, its a no brainer. Thanks!
April 22, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-1996Ford Bronco Ford Bronco Interior Door Handle Latch Cable
1992-1996Ford F150 Truck Ford F150 Truck Interior Door Handle Latch Cable
1992-1996Ford F250 Truck Ford F250 Truck Interior Door Handle Latch Cable
1992-1997Ford F350 Truck Ford F350 Truck Interior Door Handle Latch Cable
1992-1997Ford F450 Truck Ford F450 Truck Interior Door Handle Latch Cable
Part #: 1ADMX00062

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(14:00 min)