Replaces

Ford Disc Brake Caliper Bracket Front Pair A1 Cardone 14-1029 - CABCS00011

CARDONE FRONT DISC BRAKE CALIPER BRACKET PAIR (14-1029)

These replacement caliper brackets are just what you need to get your vehicle in good working form again!

Specifications:

  • Rebuilt CARDONE Front Brake Caliper Brackets
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • Replaces dealer part number: F81Z-2B292-AB, F81Z2B292AB
  • Brackets are coated with rust protection to extend product life
  • Grease packs included for installation
  • Direct replacements
  • Rebuilt to strict quality control standards
  • No core charge

These caliper brackets are great replacements and have good cost savings over dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Remove the hub cap with a flat blade screwdriver
    • Loosen the lug nut covers with a 21mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:15)
    • Remove the 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the caliper
    • Remove the two springs
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the two 21mm bolts on the back of the caliper bracket
    • Remove the bracket
  3. step : Preparing the New Caliper Bracket (2:42)
    • Remove the brake pad slides
    • Push the brake pad slides into place on the new caliper bracket
    • Pull off the bracket slides
    • Pull off the old boot from the bracket slide and push the new one into place
    • Push the bracket slide into place on the new caliper bracket
  4. step : Installing the Caliper (3:34)
    • Put the caliper on
    • Replace and tighten the 21mm bolts
    • Torque the 21mm bolts to 100 ft/lbs
    • Install the new brake pads into the bracket
    • Replace the springs
    • Place the caliper onto the bracket
    • Replace and tighten the 17mm bolts
    • Torque the bolts to 60 ft/lbs
  5. step : Reinstalling the Wheel (5:02)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 21mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the center cap
  6. step : Testing the Brakes (6:00)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2005 Ford Excursion Front (Remanufactured) Disc Brake Caliper Bracket Pair A1 Cardone 14-1029
  • 1999-2004 Ford F250 Super Duty Truck Front (Remanufactured) Disc Brake Caliper Bracket Pair A1 Cardone 14-1029
  • 1999-2004 Ford F350 Super Duty Truck Front (Remanufactured) Disc Brake Caliper Bracket Pair A1 Cardone 14-1029

This part replaces:

  • A1 Cardone 14-1029
Only 1 left in stock
Part #: CABCS00011



A1 CARDONE
Brand #: 14-1029

How-to Video:

(06:28 min)