This replacement corner side marker light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side)
  • Mounts to the side of the headlight
  • Replaces dealer part number: F2TZ-15A201-C, F2TZ15A201C
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Does not include bulbs or wiring

This corner side marker lamp is a great replacement and has good cost savings over a corner side marker light from the dealer.

 

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Light Assembly (0:47)
    • Remove the two 10mm nuts from the side marker light
    • Remove the two Phillips screws from the top of the headlight
  2. step : Servicing the Bulbs (2:19)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  3. step : Removing the Side Marker Light (3:03)
    • Remove the two 11mm nuts from the side marker light
    • Remove the side marker light
  4. step : Installing the Side Marker Light (3:10)
    • Insert the side marker light into place
    • Tighten the two 11mm nuts to the side marker light
  5. step : Installing the Light Assembly (3:58)
    • Insert the assembly into place
    • Tighten the 10mm bolts to the light assembly
    • Tighten the top Phillips screws

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket
  • 11mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Ford Bronco Corner Light Passenger Side
  • 1992-1996 Ford F150 Truck Corner Light Passenger Side
  • 1992-1996 Ford F250 Truck Corner Light Passenger Side
  • 1997 Ford F250 Truck Corner Light Passenger Side
  • 1992-1997 Ford F350 Truck Corner Light Passenger Side

This part replaces:

  • Partslink FO2551108
  • Hollander 116-3018R
  • OE # F2TZ 15A201 C
  • TYC 17-1124-01
  • DEPO 331-1515R-US
Part #: 1ALPK00277

How-to Video:

(04:44 min)