This replacement Expedition or Pickup corner parking light is just what you need to get your Ford in good looking form again!


  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side)
  • Replaces Dealer part numbers: F75Z 13201 AC & F75Z 13200 AC
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Mounts to the outside of the headlight
  • Does not include bulbs or wiring

This Expedition or Pickup corner parking lamp pair is a great replacement and has good cost savings over a parking light pair from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Side Marker Light (0:53)
    • Remove the T20 Torx bolt from the top of the side marker light
    • Pull the marker light forward and out
    • Disconnect the marker light wiring harness
  2. step : Servicing the Side Marker Light Bulb (1:25)
    • Twist the bulb counterclockwise out of the marker light
    • Twist the new bulb into the marker light if reinstalling the old assembly
  3. step : Installing the New Side Marker Light (1:29)
    • Twist the bulb clockwise into the new headlight if installing a new assembly
    • Connect the wiring harness to the new marker light
    • Push the marker light into place using the locating tabs
    • Insert the T20 bolt into the top of the marker light

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 9mm Socket
  • 8mm Socket

  • Torx Drivers & Sockets

  • T20 Torx Driver

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Side marker and signals light
Sure not worth looking in a salvage yard when you can get brand new cheaper and better. Great valve and great service from these folks.
November 17, 2017
over 2 years ago
Package perfect all around. Shipment arrived early. Install easy and quick. Will source 1A again and tell friends to do the same.
July 2, 2017
1 year ago
Light corner turn
Perfect fit lookin great easy to follow instructions. Thanks 1A Auto.
February 21, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2002 Ford Expedition Corner Light Pair
  • 1997 Ford F150 Truck Corner Light Pair (Built After 6/96 Production Date)
  • 1998-2000 Ford F150 Truck Corner Light Pair
  • 2001 Ford F150 Truck (excluding Lightning Models) Corner Light Pair
  • 2002-2003 Ford F150 Truck (excluding Lightning Models) (excluding Harley Davidson Edition) Corner Light Pair
  • 1997 Ford F250 Light Duty Truck Corner Light Pair (Built After 6/96 Production Date)
  • 1998-1999 Ford F250 Light Duty Truck Corner Light Pair

This part replaces:

  • OE # F75Z 13200 AC
  • OE # F75Z 13201 AC
  • Partslink FO2551118, FO2550118
Part #: 1ALPP00048

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:08 min)