Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement parking side marker light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement
  • Replaces dealer part number: 1L3Z-13201-BA, 1L3Z13201BA
  • Correct for F-150 Lightning & Heritage models only
  • Does not include bulbs or wiring

This parking side marker lamp is a great replacement and has good cost savings over a corner light from the dealer.

 

 

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the headlight (1:17)
    • Pop the hood.
    • Pull up on the two tabs at the top of the headlight.
    • Use a T20 Torx driver to remove the parking light.
    • Remove the small Torx screw and pull the parking light out.
    • Pull the headlight forward and out.
    • Unplug the wiring connector and bulbs.
  2. step : Install the new headlight (2:30)
    • Transfer the bulbs into the new headlight assembly.
    • Plug in the wiring harness.
    • Fit the headlight and parking light assembly into place.
    • Secure the parking light assembly with your T20 Torx driver.
    • Clip the tabs down to secure the headlight.
    • Close the hood.

Tools needed for replacement:

    Torx Drivers & Sockets

  • T20 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2002Ford Expedition Ford Expedition Lightning Style Corner Light Driver Side
2004Ford F150 Heritage Truck Ford F150 Heritage Truck Lightning Style Corner Light Driver Side
1997-2003Ford F150 Truck Ford F150 Truck Lightning Style Corner Light Driver Side
1997Ford F250 Light Duty Truck Ford F250 Light Duty Truck (Built After 7/96 Production Date) Lightning Style Corner Light Driver Side
1998-1999Ford F250 Light Duty Truck Ford F250 Light Duty Truck Lightning Style Corner Light Driver Side
Part #: 1ALPK00630


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:16 min)