Replaces

Ford Bronco II Driveshaft A1 Cardone 65-9822 - CADSH00019

A1 CARDONE DRIVESHAFT (65-9822) REAR

This REAR Driveshaft is a newly remanufactured part that has been rebuilt to very strict quality control standards. It is just what you need to get your vehicle in good working order!

Specifications:

  • Replaces REAR Driveshaft with GKN Design
  • Rebuilt to strict quality control standards
  • No core charge
  • Construction type:
    • Transfer Case Side: U- Joint Type with 4 Bolt Rectangular Flange
    • Rear Axle Side: U-Joint with 4 Bolt Rectangular Flange
    • Length: 30 1/4" Prop Shaft
  • Correct for models with GKN Design which has a single U-Joint on each end
  • Does not fit the Dana Design which uses a Double Cardan U-Joint at one end

Features & Benefits of this rebuilt driveshaft:

  • 100% Dynamically Balanced. - Reduces vibration and increases joint life. Dynamic balance is better than static because the unit is balanced at the speeds it will see on the vehicle.
  • 100% New Universal Joints Installed. - Ensures proper fit & function for optimal performance and durability
  • All slip yokes are lubricated to O.E. specifications to prevent premature wear.
  • High speed balancing at 3200 RPMs ensure vibration-free operation.
  • All shafts are measured to guarantee proper fit.

 

Part Details

  • Product Grade: Remanufactured

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1984Ford Bronco II Ford Bronco II Rear (Remanufactured) Driveshaft for Models with Automatic Transmission A1 Cardone 65-9822
1984Ford Bronco II Ford Bronco II Rear (Remanufactured) Driveshaft for Models with 4 Speed Manual Transmission A1 Cardone 65-9822
1985-1987Ford Bronco II Ford Bronco II Rear (Remanufactured) Driveshaft for Models with Automatic Transmission and GKN Design Drive Shaft A1 Cardone 65-9822
1988Ford Bronco II Ford Bronco II Rear (Remanufactured) Driveshaft A1 Cardone 65-9822
1989Ford Bronco II Ford Bronco II 2 Wheel Drive Rear (Remanufactured) Driveshaft for Models with Automatic Transmission (Built Before 6/89 Production Date) A1 Cardone 65-9822
1989-1990Ford Bronco II Ford Bronco II 4 Wheel Drive Rear (Remanufactured) Driveshaft A1 Cardone 65-9822

This part replaces:

  • A1 Cardone 65-9822
Only 1 left in stock
Part #: CADSH00019


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

A1 CARDONE
Brand #: 65-9822