Replaces

Ford Brake Rotor Pair Nakamoto F81Z 1125 DA - 1ABFS00091

These front brake rotors are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: F81Z-1125-DA, F81Z1125DA
  • 13mm Thick Hub Flange
  • Direct replacement
  • 8 Wheel Stud Holes
  • Fits 4WD (Four Wheel Drive) Models only
  • 13" Diameter

These brake rotors make great replacements and have excellent value over the price of dealer brake rotors.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:49)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the 21mm lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:16)
    • Remove the two 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the two springs off of the brake pads
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:16)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (2:50)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Apply grease to the caliper slides
  5. step : Installing the New Brake Rotor (4:06)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the 21mm bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:40)
    • Install the new brake pads into the bracket
    • Push on the brake pad springs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 17mm bolts by hand
    • Tighten the 17mm bolts to 60 foot-pounds
  7. step : Reattaching the Wheel (6:13)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:11)
    • Check the brake fluid level
    • Add brake fluid if necessary
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Brake Parts Cleaner
  • Bearing Grease
  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2004 Ford Excursion 4 Wheel Drive Front Brake Rotor Pair Nakamoto
  • 2005 Ford Excursion 4 Wheel Drive Front Brake Rotor for Models with 4 Wheel ABS Brakes Pair Nakamoto
  • 1999 Ford F250 Super Duty Truck 4 Wheel Drive Front Brake Rotor Pair (Built After 3/22/99 Production Date) Nakamoto
  • 2000-2004 Ford F250 Super Duty Truck 4 Wheel Drive Front Brake Rotor Pair Nakamoto
  • 1999 Ford F350 Super Duty Truck 4 Wheel Drive Front Brake Rotor Pair for Models with 13" (330mm) Diameter Rotors (Built After 3/22/99 Production Date) Nakamoto
  • 2000 Ford F350 Super Duty Truck 4 Wheel Drive Front Brake Rotor Pair for Models with 13" (330mm) Diameter Rotors Nakamoto
  • 2001-2004 Ford F350 Super Duty Truck 4 Wheel Drive Front Brake Rotor for Models with 4 Wheel ABS Brakes Pair 13" (330mm) Diameter Rotors Nakamoto
  • 2001-2002 Ford F450 Truck 4 Wheel Drive Front Brake Rotor Pair for Models with 13" (330mm) Diameter Rotors Nakamoto
  • 2003 Ford F450 Truck 4 Wheel Drive Front Brake Rotor Pair for Models with Axle ID 2C34-3002 & 13" (330mm) Diameter Rotors Nakamoto
  • 2000-2002 Ford F550 Truck 4 Wheel Drive Front Brake Rotor Pair for Models with 13" (330mm) Diameter Rotors Nakamoto
  • 2003 Ford F550 Truck 4 Wheel Drive Front Brake Rotor Pair for Models with Axle ID 2C34-3002 & 13" (330mm) Diameter Rotors Nakamoto

This part replaces:

  • OE # F81Z 1125 DA x2
  • Nakamoto F81Z 1125 DA
Part #: 1ABFS00091


Nakamoto
Brand #: F81Z 1125 DA

How-to Video:

(07:45 min)