Brake Pad Specifications:

  • Premium Posi Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Brake Rotor Specifications:

  • Comes as a Set of 4
  • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Direct replacement
  • Fits 5 Stud Wheels
  • Front 12" (304mm) diameter
  • Rear 11.81" (300mm) diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Consulting Part 1 of the Video (0:05)
    • This is part 2 of a 2 part video
    • Please refer to part 1 for the preceding steps
    • Perform the procedure from part 1
  2. step : Checking the Emergency Brakes (0:16)
    • Enlist the help of an assistant
    • Instruct the assistant to press and release the emergency brake
    • Check that the brake shoes move correctly
    • Instruct the assistant to press and release the emergency brake
    • Check that the brake cable moves
  3. step : Adjusting the Brakes (0:53)
    • Turn the adjuster wheel with a flat blade screwdriver
    • Apply penetrating oil if necessary
  4. step : Replacing the Emergency Brake Shoes (1:27)
    • Pull down the tab
    • Remove the springs
    • Pull off the shoes
    • Replace the shoes
  5. step : Replacing the Brakes (2:14)
    • Slide the disc on
    • Reattach the brake pads to the piston
    • Inspect the slides. They should move freely
    • If necessary, remove the slides, clean and grease them, and then slide them back in
  6. step : Cleaning the Brake Shoe Slides (4:15)
    • Clean the brake shoe slides with a wire brush
    • Apply grease to the brake shoe slides
  7. step : Reattaching the Brake Pads (4:45)
    • Slide the brake pads into place
    • Insert the 10mm bolts from the back
    • Tighten the bolts to 20 foot-pounds
  8. step : Replacing the wheel (5:54)
    • Slide the wheel into place
    • Start threading the lug nuts by hand
    • Tighten the lug nuts
    • Lower the vehicle
    • Tighten the lug nuts to 90 foot-pounds in a star pattern
    • Replace the hub cap
  9. step : Road Testing the Vehicle (5:32)
    • Pump the brakes repeatedly to return fluid to the cylinder
    • Test the brakes at very low speed to ensure they work

Tools needed for replacement:

    General Tools

  • Assistant
  • Floor Jack
  • Jack Stands
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
1
0
0
High Quality Rotors and Brakes
Haven't heard a peep out of the brakes yet and pulsating brakes came to a hault when i changed out the new high quality rotors. Being ceramic brakes they take a few hundred miles to break in.
April 17, 2018
Purchased
3 weeks ago
The front and rear rotors we're okay the rear pads were wrong abd the front pads came with no Hardware
July 10, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003 Ford Explorer Sport 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit
  • 2003-2005 Ford Explorer Sport Trac 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit
Part #: 1ABFS02484



How-to Video:

(06:47 min)