Replaces

Ford Brake Kit Nakamoto CD824, CD757, 54071, YC3Z2C026BB - 1ABFS02420

Part Details

  • Brake Pad Bonding Type: Premium Posi
  • Front Brake Rotor Specifications:
    13.03" (331mm)
    Vented
    8 Lug
  • Brake Pad Friction Material: Ceramic
  • Kit Includes:
    (1) Front Ceramic Brake Pad Set
    (1) Rear Ceramic Brake Pad Set
    (2) Front Replacement Brake Rotors
    (2) Rear Replacement Brake Rotors
  • Rear Brake Rotor Specifications:
    12.83" (326mm)
    8 Lug
    Solid
  • Brake Pad Features & Benefits:
    OE Grade Multi-Layer Shim
    Positive Mold Technology
    Environmentally Compliant
    Thermal Scorched

Specifications:

  • Premium Ceramic brake pads
  • 8 Piece Front & Rear brake pad set
  • Includes shims
  • Direct replacement

Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side) Front & Rear
  • Replaces dealer part numbers: F81Z1102BA, F81Z 1102 BA
  • Fits 8 Lug Wheels
  • Front 13.03" diameter

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:49)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the 21mm lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:16)
    • Remove the two 17mm bolts from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the two springs off of the brake pads
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:16)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Strike the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Preparing the New Brake Pads and Rotors (2:50)
    • Clean the rotor with brake parts cleaner
    • Apply grease to the brake pad tabs
    • Apply grease to the caliper slides
  5. step : Installing the New Brake Rotor (4:06)
    • Slide the rotor on
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the 21mm bolts to 100 foot-pounds of torque
  6. step : Installing the New Brake Pads (4:40)
    • Install the new brake pads into the bracket
    • Push on the brake pad springs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread the two 17mm bolts by hand
    • Tighten the 17mm bolts to 60 foot-pounds
  7. step : Reattaching the Wheel (6:13)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  8. step : Testing the Brakes (7:11)
    • Check the brake fluid level
    • Add brake fluid if necessary
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Cloth Rags
  • Brake Parts Cleaner
  • Bearing Grease
  • Brake Fluid

  • Ratchets & Related

  • Ratchet
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 21mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Great service with issue
Great service with speedy shipping as always. It would be very helpful to be informed that additional parts are required to complete the installation. On my truck, I had to go to local parts store for new front bearings and grease after starting the install.
Also one of the lugs on my rotor wasn’t completely seated into the rotor. Was able to seat it with lug nuts. I will shop 1A auto again because of the great customer service that I have experienced in the past. And the videos are very helpful. Keep up the good work.
June 25, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2000-2002Ford Excursion Ford Excursion Rear Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
1999-2002Ford F250 Super Duty Truck Ford F250 Super Duty Truck Rear Wheel Drive 4 Wheel ABS Brakes Front & Rear Premium Posi Ceramic Brake Kit Nakamoto
1999-2002Ford F350 Super Duty Truck Ford F350 Super Duty Truck Rear Wheel Drive 4 Wheel ABS Brakes with Single Rear Wheels (SRW) Front & Rear Premium Posi Ceramic Brake Kit Nakamoto

This part replaces:

  • Nakamoto CD824, CD757, 54071, YC3Z2C026BB
Part #: 1ABFS02420


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Nakamoto
Brand #: CD824, CD757, 54071, YC3Z2C026BB

How-to Video:

(07:45 min)