Replaces

Ford Brake Kit Nakamoto CD711, CD679, 54042, 54090 - 1ABFS01801

This brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi CERAMIC Enhanced Disc Brake Pads
  • 8 Piece FRONT & REAR Brake Pad Set
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: F65Z-1125-AC, XL3Z-1125-CB, YL1Z-2C026-AA, YL3Z-1125-AA, YL7Z-1V125-BA, F65Z1125AC, XL3Z1125CB, YL1Z2C026AA, YL3Z1125AA, YL7Z1V125BA
  • Direct replacements
  • Fit 5 Lug Wheels
  • FRONT - 12.1" (308mm) Diameter Vented Rotors
  • REAR - 13.15" (334mm) Diameter Rotors
  • Fits 4WD (Four Wheel Drive) Models only

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

Thermal Scorched

Pre-burnishing or "Thermal Scorching" is the final curing step in quality ceramic brake pad manufacturing. The brake pad's surface is heated to remove any uncured bonding agents and to stabilize the friction material to accelerate the break-in process and enhance stopping performance from the first stop.

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:30)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads and Rotor (1:00)
    • Remove 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  3. step : Preparing the New Brake Pads and Caliper (3:05)
    • Remove the brake pad brackets
    • Remove the caliper boot slides
    • Clean the brake pad brackets with a wire brush
    • Clean the caliper bracket with a wire brush
    • Clean off the caliper boot sliders and inspect the boots
    • Apply grease to the caliper slides
    • Insert the slides into the caliper
    • Press on the brake pad brackets
    • Apply grease to the brake pad slides
  4. step : Installing the New Brake Rotor (9:20)
    • Slide the rotor on backwards
    • Clean the rotor with brake parts cleaner
    • Turn the rotor around
    • Clean the rotor with brake parts cleaner
    • Put the caliper bracket back into place
    • Start the bolts by hand
    • Tighten the bolts to 136 foot-pounds of torque
  5. step : Installing the New Brake Pads (11:12)
    • Apply grease to the brake pad tabs
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 21-26 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  6. step : Reattaching the Wheel (14:02)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 83-112 foot-pounds in a crossing or star pattern
  7. step : Testing the Brakes (14:45)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill Bit Set

  • General Tools

  • Large C-Clamp
  • Jack Stands
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Block of Wood
  • Brake Parts Cleaner
  • Safety Glasses
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket

4.8 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
5
1
0
0
0
Installed 3 months ago
Excellent deal for this kit! ( purchased on sale ).

I have a used truck with tons of miles so buying performance parts is a waste of money. I rarely tow anything. I normally am not a heavy breaker either.

I was metal to metal all around and rotors under speck. Quote from auto repair was in excess of 900$. Jumped on 1A because they provide best bang for the buck.

Install was easy ( with proper tools and instructional video ). *** Just remember your reservoir will back fill as you decompress caliper and you may need to suck out excess fluid before it come out the cap.

After 3 months, brakes still work great with no warping or excessive pad wear.

Only Con:
Kit did not come with new guide clips (you have to use existing).
February 22, 2017
Purchased
1 year ago
Fast service, good product
THE parts came quickly. They fit fine. Easy install. I would definitely recommend this. The price was way better here then anywhere else.
November 7, 2017
Purchased
6 months ago
Perfect. Came with all the parts and they were the right ones
March 23, 2017
Purchased
1 year ago
THE BEST EVER!!!!!!
I order 2 brakes and rotor kits, but I ordered the wrong part I called back to let 1A Auto know and they refunded me with problem. I recommend any body that is looking for cheap parts for a deal price these your guys to go too! I'm working on another car soon so I know were I will be buying parts from.

THanks!!! The Clarks
September 1, 2017
Purchased
8 months ago
We will be returning Customers
Very pleased with our kit came in a very timely manner with everything in it and when UPS separated the package you guys were more than willing to help figure out the problem.thanks
July 29, 2017
Purchased
9 months ago
Fast shipping. Right parts
This is the first time I have made a purchased but I was very satisfied with the fast shipping. The parts I ordered were the exact ones I needed.
September 23, 2017
Purchased
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Do these fit 12 and/or 14mm studs?
Jessi F on Oct 8, 2016
BEST ANSWER: This will fit the vehicles listed below.

VEHICLE FIT
2004 Ford F150 Heritage Truck 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Pad & Rotor Kit for Models with 5 Lug Wheels excluding Lightning Models

1997-2003 Ford F150 Truck 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Pad & Rotor Kit for Models with 5 Lug Wheels excluding Lightning Models

Vehicle Fit

  • 2004 Ford F150 Heritage Truck 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit for Models with 5 Lug Wheels (excluding Lightning Models) Nakamoto
  • 1997-2003 Ford F150 Truck 4 Wheel Drive Front & Rear Premium Posi Ceramic Brake Kit for Models with 5 Lug Wheels (excluding Lightning Models) Nakamoto

This part replaces:

  • Nakamoto CD711, CD679, 54042, 54090
Part #: 1ABFS01801


Nakamoto
Brand #: CD711, CD679, 54042, 54090

How-to Video:

(14:56 min)