This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Premium Posi SEMI-METALLIC Disc Brake Pads
  • 4 Piece FRONT brake pad set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
  • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: F81Z1102BA, F81Z 1102 BA
  • Fits 8 Lug Wheels
  • Vented
  • 13.03" diameter

This brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Note:
The rotors do not include wheel bearings or seals.

Positive Mold Technology

Positive Mold Technology improves durability and performance by allowing for even wear. High density, low resin friction material virtually eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

OE Grade Multi-Layer Shim helps reduce vibration and noise

Environmentally Compliant

Certified Environmentally Compliant to "Better Brake Law" standards

100% CNC-Machined to Exact OE Specs

100% CNC-Machined to exact OE specs and balanced to reduce vibration

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy

Non-Directional Surface Finish

Non-Directional Rotor Surface Finish helps ensure smoother, quieter, and more effective braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Remove the Wheel (0:56)
    • Pry the center cap off.
    • Loosen the lug nuts.
    • Raise the vehicle.
    • Remove the lug nuts.
    • Remove wheel. (If it is stuck, replace one lug nut and hit the wheel till it brakes loose).
  2. step : Removing the Brakes (2:16)
    • Remove the two bolts on the back of the brake calipers.
    • Place a screwdriver in the side of the caliper and pry the brake pistons back in.
    • Remove the Caliper.
    • Pull the brake pads out and remove the spring.
  3. step : Removing the Rotors (5:10)
    • Remove the two 21mm bolts from the bracket. (Use a breaker bar or piece of pipe for leverage.
    • Remove the caliper bracket.
    • Spray the studs and hub with penetrating oil and let it sit.
    • Pry the disc free from the hub.
  4. step : Replacing the Brakes (6:47)
    • Put the rotor in place.
    • Replace the slides in the brake calipers with the new slides.
    • Replace the caliper bracket.
    • Reinsert the 21mm bolts in the bracket. Torque to 145ft/lbs.
    • Put your old pads in the caliper bracket and use a c-clamp to push the pad into the caliper and reset the pistons.
    • Wire brush the slides if old, and put them back into place.
    • Slide the new pads into place.
    • Put the caliper back into place and reinsert the caliper bolts. Torque to 23 - 25ft/lbs.
  5. step : Replace the Wheel (12:08)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle and tighten the lug nuts in a crossing pattern. Torque to 120ft/lbs.
    • Replace the center cap.
  6. step : Road Test Before Use (12:37)
    • Pump the brakes until they are firm.
    • Test stopping from 5mph
    • Test stopping from 10mph.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Wire Brush
  • Large Hammer
  • Large C-Clamp

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet
  • A Piece of Pipe (for leverage)

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 17mm Socket
  • 16mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000-2002 Ford Excursion 2 Wheel Drive 4 Wheel ABS Brakes Front Premium Posi Semi-Metallic Brake Kit
  • 1999-2002 Ford F250 Super Duty Truck 2 Wheel Drive 4 Wheel ABS Brakes Front Premium Posi Semi-Metallic Brake Kit
  • 1999-2002 Ford F350 Super Duty Truck 2 Wheel Drive 4 Wheel ABS Brakes with Single Rear Wheels (SRW) Front Premium Posi Semi-Metallic Brake Kit
Part #: 1ABFS00610


How-to Video:

(13:09 min)