This replacement fog light is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits LH (Driver Side)
    • Bumper Mounted
  • Replaces dealer part numbers: 81220-06070, 81220-0D040, 8122006070, 812200D040
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulbs or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Removing the Front Bumper (0:24)
    • Place tape along the edge of the bumper to mark its location
    • Remove the 10mm bolts from the splash shield
    • Remove the splash shields
    • Turn the clip in the fender liner on either side
    • Pull back the fender liner
    • Remove the 10mm bolt from the bumper on either side
    • Remove the 10mm bolt from the metal support on top of the bumper
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Remove the Phillips retainer from the bracket
    • Pry up the plastic pin from the headlight with a flat blade screwdriver
    • Pull the bumper off of the bracket
  2. step : Removing the Headlight (6:19)
    • Remove the 10mm bolts from the headlight bracket
    • Pull the headlight out
    • Disconnect the headlight wiring harness
  3. step : Servicing the Bulbs (9:38)
    • Twist the bulb socket counterclockwise out of the light
    • Pull the bulb off of the socket
    • Push on the new bulb
    • Twist the bulb clockwise into the light
  4. step : Installing the New Headlight (11:10)
    • Reconnect the wiring harness to the headlight
    • Line up the bolt holes on the headlight bracket to the bolt holes on the vehicle
    • Replace the 10mm bolts and grommets into the headlight bracket
  5. step : Installing the Front Bumper (13:08)
    • Hang the bumper on the top brackets
    • Push the bumper into the bracket on both sides
    • Press in the push clips to the headlights
    • Tighten the Phillips retainers to the metal bracket
    • Press in the clips to the bumper
    • Tighten the screw to the bumper behind the fender liner on both sides
    • Replace the splash shield
    • Tighten the 10mm bolts to the splash shield

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
0
1
0
0
0
Review: Purchase of Toyota Venza Fog Lamp (Driver Side)
About the product:

After market. Fit the fog lamp slot perfectly. Works well. No issues. The product came with its own bulb and this helped me save the older working bulb, for future use.

Product Installation:

Super easy in the Venza. Took about 15 minutes to replace the old one.

Buying and receiving from 1A Auto:

Ordered online. Did not receive the Product on the date specified. After checking with local postal agency, sent an email to 1A Auto regarding non-delivery. They shipped another piece which I received. The packaging was good and the product was clean and not damaged. Except for the non-delivery on the first instance leading to more wait time), I did not face any other issues with 1A Auto.

1A Auto is a good online shop to consider when ordering auto parts.
June 30, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
How to install the fog light?
Philip H on May 17, 2016
BEST ANSWER: Really simple. Disconnect bulb then remove one mounting screw from fog light assembly and assembly comes right out. Reverse process to install new fog light.

How-to Video:

(17:26 min)

Tools List:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket



This part replaces:

  • OE # 8122006070, 812200D040
  • Partslink SC2592100
  • Hollander 116-50131L
  • TYC 19-5922-00-1
  • DEPO 212-2052L-AF

Vehicle Fit

  • 2013 Lexus GS350 Fog / Driving Light Driver Side
  • 2013 Lexus GS450h Fog / Driving Light Driver Side
  • 2010-2012 Lexus HS250h Fog / Driving Light Driver Side
  • 2008-2013 Lexus IS-F Fog / Driving Light Driver Side
  • 2008-2011 Lexus LX570 Fog / Driving Light Driver Side
  • 2013 Lexus LX570 Fog / Driving Light Driver Side
  • 2010-2013 Lexus RX350 Fog / Driving Light Driver Side
  • 2010-2013 Lexus RX450h Fog / Driving Light Driver Side
  • 2006 Scion xA Fog / Driving Light Driver Side
  • 2008-2010 Toyota Avalon Fog / Driving Light Driver Side
  • 2007-2014 Toyota Camry Fog / Driving Light Driver Side
  • 2009-2013 Toyota Corolla Fog / Driving Light Driver Side
  • 2008-2010 Toyota Highlander Fog / Driving Light Driver Side
  • 2009-2013 Toyota Matrix Fog / Driving Light Driver Side
  • 2010-2011 Toyota Prius Fog / Driving Light Driver Side
  • 2006-2012 Toyota Rav4 Fog / Driving Light Driver Side
  • 2007-2008 Toyota Solara Fog / Driving Light Driver Side
  • 2009-2016 Toyota Venza Fog / Driving Light Driver Side
  • 2007-2016 Toyota Yaris Fog / Driving Light Driver Side
Part #: 1ALFL00308

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More