This replacement fog driving light is just what you need to get your vehicle in good looking form again

Fog Light Specifications

  • LH (Driver Side)
  • Replaces dealer part number:15175700
  • Injection molded plastic
  • DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
  • Direct replacement fog light
  • Fog light does not include bulb or wiring

This fog driving lamp is a great replacement and has good cost savings over a fog light from the dealer.

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Light uses same wiring as the original assembly, providing easy, trouble-free installation.  No cutting or splicing required.

DOT and SAE Compliant

DOT & SAE compliant: meets federal regulations for on-road use

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly.

  1. step : Servicing the Fog Light Bulbs (0:19)
    • Twist the bulb counterclockwise
    • Pull the bulb out of the fog light
    • Disconnect the wiring harness from the bulb
    • Twist the new bulb into the fog light, being sure not to touch the bulb
    • Attach the wiring harness to the new bulb
  2. step : Removing the Fog Light (1:30)
    • Disconnect the wiring harness
    • Remove the three 10mm nuts from the fog light
    • Pull the fog light out from the front of the bumper
  3. step : Installing the New Fog Light (2:09)
    • Push the new fog light into place from the front of the bumper
    • Start the three 10mm nuts by hand
    • Tighten the three 10mm nuts
    • Connect the wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2005 Chevy Trailblazer Fog / Driving Light Driver Side
  • 2006-2009 Chevy Trailblazer (excluding SS Models) Fog / Driving Light Driver Side
  • 2002-2006 Chevy Trailblazer EXT Fog / Driving Light Driver Side
  • 2003-2008 Isuzu Ascender Fog / Driving Light Driver Side

This part replaces:

  • Partslink GM2592123
  • Hollander 116-02306L
  • OE # 15175700
  • TYC 19-5544-00
  • DEPO 335-2004L-AF
Part #: 1ALFL00056

How-to Video:

(03:18 min)