Part Details

  • Fender Flare Type: Rugged Style
  • Color: Black
  • Quantity: 4 Piece Set
  • Finish: Smooth - Paint to Match

Specifications:

  • 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Size:
    • Height - 4"
    • Extension Width - 1-1/2"
  • High quality ABS Plastic
  • Smooth black paint to match finish
  • UV protected from fading and chalking
  • Direct fit, no drilling or cutting required
  • Includes hardware and instructions

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Quick, Easy, No-Drill Installation

No permanent modifications required. Flares mount using included wheel arch clips and heavy duty 3M double-sided tape.

Direct Fit

Designed and contoured to fit your specific vehicle.

Durable ABS Plastic

Rugged, impact- and UV-resistant ABS plastic won't crack or warp

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

3.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
2
0
0
1
flares did not fit
Web site says this is a match for my 2004 Silverado 2500 hd extended cab but when trying it on the truck these were to small I was able to slide them forward and backwards almost a full inch I would never have been able to get the fasteners attached all the way around . Called for an R A number no problem sent me an email that's when I found out I had to pay the shipping I could live with that if I had ordered the wrong part or if I changed my mind but this was clearly bad info on the web site . I guess I should have read the fine print better.
September 15, 2018
Purchased
3 weeks ago
Response from 1A Auto
Thank you for taking the time to leave us this review. We will be reaching out to you regrading this.
September 15, 2018
Corey M
Great Value
A bit harder to install than anticipated but they look great in the end. Much better deal than OEM.
July 24, 2018
Purchased
2 months ago
Fit perfectly
I purchased these fender flares because of heavy rust and needed to pass inspection. After installing you wouldn't even know there was any rust at all. They fit great and look great. Installation was super easy with included push pins and screws. The 3m tape was a pain but with patience and a few curse words, I was able to get it done. Took about 5 minutes per flare installing the tape and less than 5 minutes to install flare to my truck. Very pleased with the end result.
February 23, 2018
Purchased
7 months ago
Fender flares
fender flares were a great fit,It took a lil time installing the 3m trim on the flares. The only issue was i didn't receive all the the fasteners but picked them up at my local auto parts. The installation was quick after that.
March 18, 2017
Purchased
1 year ago
Great Product
Fit beautifully! Easy to install. Look great. Nice price!!

What else can I say? I am very very pleased with this purchase !!!
January 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 4 answers
Do theses flares have a rubber seal?
joshua f on Apr 26, 2016
BEST ANSWER: Yes. The rubber trim seal comes with these as a single length roll. Before installing them on your truck, you have to apply the trim seal your self and cut it to length for each individual flare. It sticks to the inner flare edge with an adhesive strip attached to the rubber trim. It takes a bit of time, but isn't difficult. There are detailed instructions included with the kit and enough rubber seal for 4 flares plus a bit extra in case you make a mistake.
Does the rubber seal act as protection between the flare and the truck body? or is it double sided tape?
John C on Mar 2, 2017
BEST ANSWER: Yes, the seal will act as a protector to ensure no scratches or marks left, as well as a water deterrent. This will just be a rubber seal which will mate with the fender flare as there is a groove on the seals.

Vehicle Fit

Year Make Model Description
1999-2006Chevy Silverado 1500 Chevy Silverado 1500 Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2001-2003Chevy Silverado 1500 HD Chevy Silverado 1500 HD Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2005-2006Chevy Silverado 1500 HD Chevy Silverado 1500 HD Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007Chevy Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
1999-2004Chevy Silverado 2500 Chevy Silverado 2500 Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2001-2006Chevy Silverado 2500 HD Chevy Silverado 2500 HD Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007Chevy Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2001-2006Chevy Silverado 3500 Chevy Silverado 3500 Fleetside Bed with Single Rear Wheels (SRW) Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007Chevy Silverado 3500 Classic Chevy Silverado 3500 Classic Fleetside Bed with Single Rear Wheels (SRW) Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
1999-2006GMC Sierra 1500 GMC Sierra 1500 Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
1999-2004GMC Sierra 2500 GMC Sierra 2500 Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007GMC Sierra 2500 HD Classic GMC Sierra 2500 HD Classic Fleetside Bed Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2001-2006GMC Sierra 3500 GMC Sierra 3500 Fleetside Bed with Single Rear Wheels (SRW) Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic Fleetside Bed with Single Rear Wheels (SRW) Smooth - Paint to Match Black Rugged Style Fender Flare Kit 4 Piece Set

This part replaces:

  • Trail Ridge TF10094
Part #: 1ABFK00008


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Trail Ridge
Brand #: TF10094