These replacement exterior door handles are just what you need to get your vehicle in good looking form again!

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Smooth Chrome Finish
  • Replaces dealer part numbers: 69211-AA020, 69210-33080, 69217-33010, 69217-47010, 69211-52090, 69211-12220, 69211-42010, 69211AA020, 6921033080, 6921733010, 6921747010, 6921152090, 6921112220, 6921142010
  • Durable construction
  • Direct replacements
  • Built to strict quality control standards
  • Not correct for handles equipped with Smart Entry System button

These exterior door handles are great replacements and have substantial cost savings over dealer units.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (0:23)
    • Pry up the door pull with a trim tool
    • Remove the Phillips screw from the door panel
    • Pry open the trap door on the door handle
    • Remove the Phillips screw from the door handle
    • Pry out the trim from around the door handle
    • Pry out the door panel with a trim tool
    • Lift the door panel up off the window ledge
    • Disconnect the wiring harness
  2. step : Removing the Interior Door Handle (3:25)
    • Remove the 10mm bolt from the interior door handle
    • Slide the interior door handle out of the door
    • Pop the lock cable out of the door handle
    • Lift the cable ball out of the lock
    • Pop the handle cable out of the door handle
    • Lift the cable out of the handle
  3. step : Removing the Rear Exterior Door Lock Actuator (4:13)
    • Carefully remove the vapor barrier with a razor blade
    • Remove the three T30 Torx screws from the door lock actuator
    • Remove the 10mm bolt from the door lock actuator
    • Disconnect the wiring harness
  4. step : Removing the Rear Exterior Door Handle (7:41)
    • Remove the T25 Torx bit from the exterior door handle
    • Pry off the end cap from the exterior door handle
    • Remove the T25 Torx screw from the exterior door handle
    • On the outside of the door, push the door handle backwards
    • Remove the rubber grommets
    • Remove the second T25 Torx screw from the door handle on the inside of the door
    • Remove the handle from inside the door
  5. step : Installing the Rear Exterior Door Handle (9:19)
    • Insert the rear door handle into the interior of the door
    • Press the grommets into place
    • Tighten the T25 Torx screw to the door handle
    • Press on the end cap
    • Slide on the door handle
    • Tighten the T25 Torx screw to the handle
  6. step : Installing the Rear Door Lock Actuator (11:28)
    • Latch the door lock actuator into place
    • Tighten the 10mm screw to the door lock actuator
    • Tighten the three T25 Torx screws to the door lock actuator
    • Connect the wiring harness
  7. step : Installing the Interior Door Handle (13:45)
    • Press the vapor barrier into place
    • Hook the cable into the door handle
    • Clip the cable on the door handle
    • Insert the cable ball into the lock
    • Pop the lock cable into the door handle
    • Insert the door handle onto the door
    • Tighten the 10mm bolt to the door handle
  8. step : Installing the Door Panel (16:43)
    • Connect the window switch
    • Lift the door panel into place
    • Tighten the Phillips head screw
    • Press the interior door handle trim into place
    • Tighten the Phillips screw to the door handle trim
    • Press on the trap door
    • Press the door pull into place

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Torx Drivers & Sockets

  • T30 Torx Driver
  • T25 Torx Driver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Are these handles cap type or the real deal?
Stan A on Dec 13, 2016
BEST ANSWER: These are the actual handles. These will replace your existing handles.

Vehicle Fit

  • 2009-2010 Pontiac Vibe Chrome Exterior Door Handle 4 Piece Set
  • 2004-2006 Scion xA Chrome Exterior Door Handle 4 Piece Set
  • 2008-2013 Scion xB Chrome Exterior Door Handle 4 Piece Set
  • 2003-2008 Toyota Corolla Chrome Exterior Door Handle 4 Piece Set
  • 2001-2007 Toyota Highlander Chrome Exterior Door Handle 4 Piece Set
  • 2001-2005 Toyota Rav4 Chrome Exterior Door Handle 4 Piece Set
  • 2007-2011 Toyota Yaris Chrome Exterior Door Handle 4 Piece Set
  • 2012 Toyota Yaris Sedan Chrome Exterior Door Handle 4 Piece Set
Part #: 1ADHS00883

How-to Video:

(18:40 min)