Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications:

  • Fits LH (Driver Side) REAR DOOR
  • Smooth Black Finish
    • can be painted by buyer to match or installed as is
  • Durable construction
  • Direct replacement
  • Built to strict quality control standards

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Part Details

  • Color: Black
  • Finish: Smooth - Paint to Match

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:50)
    • Pry the switch panel trim piece with a flat blade screwdriver
    • Disconnect the mirror switch wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the door lock wiring harness
    • Remove the caps from the pull handle
    • Pry the bezel from the door handle with a flat blade screwdriver
    • Remove the Phillips screws from the pull handle and side and bottom of the door
    • Lift the door panel up and off
    • Disconnect the trunk switch wiring harness
    • Carefully peel off the water shield
  2. step : Removing the Outside Door Handle (3:06)
    • Remove the yellow clip from the door lever
    • Knock the rivets out from the outside door handle with a hammer and punch
    • Drill the rivet away with a 3/8 drill bit
    • Unlatch and remove the outside door handle
    • Knock the pieces of the rivet out with a hammer and shave the rivet with a 3/8 drill
  3. step : Installing the New Outside Door Handle (4:52)
    • Twist the door lever to the door handle
    • Insert the door handle into the door
    • Feed the Phillips screws with locknuts into the door handle
    • Tighten the Phillips screws with a Phillips screwdriver and wrench
    • Reconnect the door lever to the yellow clip
  4. step : Reinstalling the Door Panel (7:13)
    • Put the water shield into place
    • Lift the door panel into place
    • Connect the trunk switch wiring harness
    • Push in the door panel clips
    • Insert and tighten the two Phillips screws at the pull handle
    • Insert and tighten the two Phillips screws at the bottom of the door panel
    • Connect the window switch wiring harnesses
    • Push in the window switch panel
    • Push on the trim piece inside the door handle

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 3/8 Inch Drill Bit

  • General Tools

  • Hammer
  • Flashlight
  • Center Punch

  • Pliers, Cutters & misc Wrenches

  • Adjustable Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver
  • Impact Screwdriver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Rear Smooth - Paint to Match Black Exterior Door Handle Driver Side
1992-2011Mercury Grand Marquis Mercury Grand Marquis Rear Smooth - Paint to Match Black Exterior Door Handle Driver Side
2003-2004Mercury Marauder Mercury Marauder Rear Smooth - Paint to Match Black Exterior Door Handle Driver Side
Part #: 1ADHE00744


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:21 min)