This replacement exterior door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits RH (Passenger Side) FRONT DOOR
  • Black Textured Finish
    • with key hole
  • Replaces dealer part number: 3W7Z-5422404-AAB, 3W7Z5422404AAB
  • Durable construction
  • Direct replacement
  • Built to strict quality control standards

This exterior door handle is a great replacement and has good cost savings over a dealer unit.

Part Details

  • Color: Black
  • Finish: Textured

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:43)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry off the two trim pieces inside the door pull with a flat blade screwdriver
    • Pry off the inner door handle bezel with a flat blade screwdriver
    • Remove the five Phillips screws from the door panel
    • Lift the door panel up and off
    • Disconnect the wiring harnesses from the door panel
    • Carefully peel off the water shield
  2. step : Removing the Outer Door Handle (4:06)
    • Unclip the latch rod
    • Punch out the two door handle rivets with a hammer and punch
    • Drill out the rivets with a 3/8" drill bit
    • Lift the door handle up and out
    • Unclip the lock rod from the door handle
    • Punch out the remains of the rivets with a hammer and screwdriver
  3. step : Installing the Outer Door Handle (7:13)
    • Clip the door handle onto the lock rod
    • Put the door handle into place
    • Insert rivets into the door handle with a rivet gun
    • If you do not have a rivet gun, insert two coarse threaded bolts into the handle
    • Clip on the lock rod
  4. step : Installing the Door Panel (10:11)
    • Put the water shield into place
    • Connect the wiring harnesses to the door panel
    • Lift the door panel into place
    • Insert the five Phillips screws into the door panel
    • Connect the window switch wiring harnesses
    • Push in the window switch panel
    • Slide on the inner door handle bezel
    • Push in the two door pull trim pieces

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 3/8 Inch Drill Bit

  • General Tools

  • Hammer
  • Flashlight
  • Center Punch

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)
  • Painter's Tape

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Specialty Tools

  • Rivet Gun & Rivets

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Front Textured Black Exterior Door Handle Passenger Side
1992-2011Mercury Grand Marquis Mercury Grand Marquis Front Textured Black Exterior Door Handle Passenger Side
2003-2004Mercury Marauder Mercury Marauder Front Textured Black Exterior Door Handle Passenger Side

This part replaces:

  • OE # 3W7Z5422404AAB
  • Dorman 82115
Part #: 1ADHE00743


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:57 min)