This replacement Exterior door handle is just what you need to get your Toyota and Geo in good working form again!

Specifications:

  • LH (Driver Side) FRONT
  • Replaces dealer part numbers: 94852496, 69220-12160, 6922012160
  • Injection molded Textured black plastic
  • Durable construction
  • Steel center rod and return spring
  • Direct replacement for original handle
  • Fits 4 door sedan and station wagon models only

This Toyota and Geo exterior door handle is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Part Details

  • Finish: Textured
  • Color: Black

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (0:27)
    • Remove the Phillips screw in the inside door handle.
    • Unclip the door latch rod.
    • Pry up the corner panel on the inside side of the side mirror.
    • With your screwdrivers, pry up the top of the door pull and remove the two Phillips screws.
    • Pry up the switch panel and unplug it.
    • Use a putty knife to unclip the door panel from the door.
    • Carefully peel back the water shield.
  2. step : Remove the outside door handle (2:30)
    • Unbolt the four 10 mm bolts and the one nut to remove the bracket in the door.
    • Reach into the door and unclip the lock and latch rods from the door handle.
    • Remove the two 10 mm bolts in the door handle.
    • Pull the lock cylinder out .
    • Remove the door handle.
  3. step : Install the new door handle (4:51)
    • Start bolting in the door handle, putting the lock cylinder in before you finish bolting down the far bolt.
    • Clip in the lock and latch rods to the door handle.
    • Bolt that bracket back in with your 10 mm socket and ratchet.
  4. step : Put the door panel back on (7:25)
    • Clip the door panel in, threading the wiring connectors through the door pull.
    • Fasten all the Phillips screws.
    • Plug in the wiring harness to the switch panel.
    • Clip the switch panel and top of the door pull down.
    • Connect the door latch with the lock and latch rods.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Perfect fit and function
I received the new part in about 2 days. I watched the associated video about three times, and the replacement work took me about 45 minutes.
Great fit/function/service.
Thank you!
October 6, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1993-1997Geo Prizm Geo Prizm 4 Door Front Textured Black Exterior Door Handle Driver Side
1993-1997Toyota Corolla Toyota Corolla 4 Door Front Textured Black Exterior Door Handle Driver Side
1996-2000Toyota Rav4 Toyota Rav4 4 Door Front Textured Black Exterior Door Handle Driver Side

This part replaces:

  • OE # 6922012160
  • Partslink TO1310102
  • DEPO 312-50003-002
Part #: 1ADHE00423


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:20 min)