This replacement exterior door handle is just what you need to get your car in good working form again!

Door Handle Specifications:

  • LH (Driver Side) FRONT DOOR
  • Replaces dealer part number: 22670069
  • Injection molded black plastic
  • Durable construction
  • Steel center rod and return spring
  • Direct replacement for original handle
  • Does not fit rear door
  • Fits Coupe or Sedan Models

This exterior door handle is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Door Panel (1:07)
    • Pry off the base mirror trim piece
    • Disconnect the mirror wiring harness
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Disconnect the door lock wiring harness
    • Remove the Phillips head screw inside the door handle
    • Remove the two Phillips head screws inside the door pull
    • Pry off the reflector
    • Remove the Phillips head screw behind the reflector
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Carefully peel off the water shield
    • For more detailed instructions, please see the 1999 Pontiac Trans Am door panel replacement video
  2. step : Removing the Outside Door Handle (2:17)
    • Remove the three T30 screws from the latch assembly
    • Remove the 10mm screw from the door handle
    • Disconnect the clip from the lock rod
    • Pull the door handle out
    • Remove the door handle rod
    • Pry off the retaining clip from the lock cylinder
    • Remove the lock cylinder
  3. step : Installing the Outside Door Handle (4:23)
    • Insert the lock cylinder into the door handle
    • Place the retaining clip around the cylinder and push the cylinder into the door handle
    • Connect the door handle rod to the handle
    • Insert the handle into place
    • Tighten the 10mm bolt and brace to the door handle
    • Tighten the three T30 Torx screws to the latch assembly
    • Clip the door lock rod into its clip
  4. step : Reinstalling the Door Panel (7:10)
    • Put the water shield into place
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the Phillips head screw behind the reflector
    • Push in the reflector
    • Insert the two Phillips head screws inside the door pull
    • Insert the Phillips head screw inside the door handle
    • Connect the door lock wiring harness
    • Connect the window switch wiring harnesses
    • Push the switch panel into place
    • Connect the mirror wiring harness
    • Push on the mirror base trim piece

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Torx Drivers & Sockets

  • T30 Torx Driver

  • Wrenches - Metric

  • 10mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Olds Alero Front Exterior Door Handle Driver Side
  • 1999-2005 Pontiac Grand Am Front Exterior Door Handle Driver Side

This part replaces:

  • Partslink GM1310137
  • OE # 22670069
Part #: 1ADHE00291

How-to Video:

(08:26 min)