Specifications:

  • LH (Driver Side)
  • Paint To Match Finish
    • Can be painted to match by buyer or installed as is
  • Direct replacement for original handle

Paint To Match Note:

"Paint to match finish" refers to a smooth, paintable surface. This item will be shipped unpainted but will be ready for paint. Final preparation is suggested for better paint coverage and adhesion. 

This part can also be installed without painting if desired. 

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:20)
    • Using a paperclip pry out the clip behind the window crank.
    • Remove the Phillips screw behind the door handle.
    • Remove the door handle bezel.
    • Remove the two 10mm bolts under the door pull.
    • Use a putty knife to pry out the clips around the door panel.
    • Lift the door panel up and off.
    • Pull back the water shield.
  2. step : Removing the Exterior Door Handle (2:21)
    • Make sure the window is all the way up.
    • Remove the plastic cap on the outside edge of the door.
    • Remove the two 10mm bolts on the backside of the door handle.
    • Reach up on the inside of the door and push the rod out of the clip.
    • Pull the door handle out and disconnect the other rod.
    • Pull the door handle out.
  3. step : Replacing the Exterior Door Handle (5:00)
    • Put the door handle up into place.
    • Replace the two 10mm bolts.
    • Reconnect the rods to the back of the handle.
    • Replace the plastic cap.
  4. step : Replacing the Door Panel (6:45)
    • Line up the door panel and push it into place.
    • Hit the clips in around the door panel.
    • Replace the door handle bezel
    • Replace the two 10mm bolts.
    • Replace the Phillips screw.
    • Put the clip back into place on the window crank and push the crank into place.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Materials, Fluids, and Supplies

  • Paper Clip

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 7mm Socket
  • 10mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1995-1997Chevy Blazer S10 Chevy Blazer S10 Front Exterior Door Handle Driver Side
1994-1997Chevy S10 Pickup Chevy S10 Pickup Front Exterior Door Handle Driver Side
1995-1997GMC Jimmy S-15 GMC Jimmy S-15 Front Exterior Door Handle Driver Side
1994-1997GMC S-15 Sonoma GMC S-15 Sonoma Front Exterior Door Handle Driver Side
1996-2000Isuzu Hombre Isuzu Hombre Front Exterior Door Handle Driver Side

This part replaces:

  • Partslink GM1310117
  • DEPO 335-50020-002
  • OE # 15647661
Part #: 1ADHE00204


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:05 min)