These replacement exterior door handles are just what you need to get your vehicle in good looking form again!


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT DOOR
  • Black Textured Finish
    • with key holes
  • Replaces dealer part numbers: 3W7Z-5422404-AAB, 3W7Z-5422405-AAB, 3W7Z5422404AAB, 3W7Z5422405AAB
  • Durable construction
  • Direct replacements
  • Built to strict quality control standards

These exterior door handles great replacements and have good cost savings over the dealer units.

Part Details

  • Quantity: Pair
  • Color: Black
  • Finish: Textured

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:43)
    • Pry up the window switch panel with a flat blade screwdriver
    • Disconnect the window switch wiring harnesses
    • Pry off the two trim pieces inside the door pull with a flat blade screwdriver
    • Pry off the inner door handle bezel with a flat blade screwdriver
    • Remove the five Phillips screws from the door panel
    • Lift the door panel up and off
    • Disconnect the wiring harnesses from the door panel
    • Carefully peel off the water shield
  2. step : Removing the Outer Door Handle (4:06)
    • Unclip the latch rod
    • Punch out the two door handle rivets with a hammer and punch
    • Drill out the rivets with a 3/8" drill bit
    • Lift the door handle up and out
    • Unclip the lock rod from the door handle
    • Punch out the remains of the rivets with a hammer and screwdriver
  3. step : Installing the Outer Door Handle (7:13)
    • Clip the door handle onto the lock rod
    • Put the door handle into place
    • Insert rivets into the door handle with a rivet gun
    • If you do not have a rivet gun, insert two coarse threaded bolts into the handle
    • Clip on the lock rod
  4. step : Installing the Door Panel (10:11)
    • Put the water shield into place
    • Connect the wiring harnesses to the door panel
    • Lift the door panel into place
    • Insert the five Phillips screws into the door panel
    • Connect the window switch wiring harnesses
    • Push in the window switch panel
    • Slide on the inner door handle bezel
    • Push in the two door pull trim pieces

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill
  • 3/8 Inch Drill Bit

  • General Tools

  • Hammer
  • Flashlight
  • Center Punch

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)
  • Painter's Tape

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Specialty Tools

  • Rivet Gun & Rivets

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
can this iteam fit on a 2008 crown victoria ?
Venessa G on Nov 29, 2015
BEST ANSWER: Hello, and thank you for your Inquiry. Yes, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our Customer Service Representatives, please feel free to give us a call. Thank you, and have a great day!

Vehicle Fit

Year Make Model Description
1992-2011Ford Crown Victoria Ford Crown Victoria Black Textured Exterior Door Handle Front Pair
1992-2011Mercury Grand Marquis Mercury Grand Marquis Black Textured Exterior Door Handle Front Pair
2003-2004Mercury Marauder Mercury Marauder Black Textured Exterior Door Handle Front Pair
Part #: 1ADHS00730

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:57 min)