Exterior Door Handle Front Passenger Side - 1ADHE00424

This replacement Exterior door handle is just what you need to get your Toyota and Geo in good working form again!


  • RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 94852495, 69210-12160, 6921012160
  • Injection molded Textured black plastic
  • Durable construction
  • Steel center rod and return spring
  • Direct replacement for original handle
  • Fits 4 door sedan and station wagon models only

This Toyota and Geo exterior door handle is a direct bolt on and is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the door panel (0:27)
    • Remove the Phillips screw in the inside door handle.
    • Unclip the door latch rod.
    • Pry up the corner panel on the inside side of the side mirror.
    • With your screwdrivers, pry up the top of the door pull and remove the two Phillips screws.
    • Pry up the switch panel and unplug it.
    • Use a putty knife to unclip the door panel from the door.
    • Carefully peel back the water shield.
  2. step : Remove the outside door handle (2:30)
    • Unbolt the four 10 mm bolts and the one nut to remove the bracket in the door.
    • Reach into the door and unclip the lock and latch rods from the door handle.
    • Remove the two 10 mm bolts in the door handle.
    • Pull the lock cylinder out .
    • Remove the door handle.
  3. step : Install the new door handle (4:51)
    • Start bolting in the door handle, putting the lock cylinder in before you finish bolting down the far bolt.
    • Clip in the lock and latch rods to the door handle.
    • Bolt that bracket back in with your 10 mm socket and ratchet.
  4. step : Put the door panel back on (7:25)
    • Clip the door panel in, threading the wiring connectors through the door pull.
    • Fasten all the Phillips screws.
    • Plug in the wiring harness to the switch panel.
    • Clip the switch panel and top of the door pull down.
    • Connect the door latch with the lock and latch rods.

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Exact match
I installed this door handle and it was the exact match. Fast delivery. Great "how-to" online video helped make it an easy one-day repair.
February 21, 2017
1 year ago
Great value,recommended hifhly
I ordered a exterior door handle for my 94 geo prizm,my local auto parts stores,wanted more then twice as much for the part,and no one had it in stock,a1 shipped it to me within 3 days,and thanks to the help from their installation video,changed the door handle in a timely manner,part fit perfect,extremely satisfied with everything,this is not the first part I have purchased from them and im sure it wont be the last,would highly recommend their site,they have quality parts at affordable prices!!
July 15, 2017
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1993-1997 Geo Prizm 4 Door Black Textured Front Exterior Door Handle Passenger Side
  • 1993-1997 Toyota Corolla 4 Door Black Textured Front Exterior Door Handle Passenger Side
  • 1996-2000 Toyota Rav4 4 Door Black Textured Front Exterior Door Handle Passenger Side

This part replaces:

  • OE # 6921012160
  • Partslink TO1311102
  • DEPO 312-50003-001
Part #: 1ADHE00424

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(09:20 min)