This replacement door handle is just what you need to get your vehicle in good looking form again!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • All Chrome Finish
  • Replaces dealer part number: 1L2Z-7826605-AAACH, 1L2Z7826605AAACH
  • Injected molded plastic
  • Direct replacement for original handle

This handle is a great replacement and has good cost savings over a dealer unit.

Part Details

  • Color: Chrome

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door handle (1:07)
    • Use a Flat blade screwdriver to pry apart the crank handle and remove the T20 screw to remove the crank handle.
    • Remove the two Phillips screws in the door pull and unclip the door pull.
    • With your Phillips screwdriver, remove the screw down by the bottom of the door panel.
    • Pull the door panel off and gently peel back the water shield.
  2. step : Remove the outside door handle (2:42)
    • Unclip the door latch rod from the door handle.
    • On the outside of the door, lift the handle to expose to rivets.
    • Use a hammer and punch to punch out the rivets.
    • Take your drill and 1/4 in bit to drill out the rivets.
    • Remove the debris with your flat blade screwdriver.
    • Take your old broken outside door panel out.
  3. step : Install the new outside door handle. (4:30)
    • Transfer the top lock rod from the old handle to the new one.
    • Use two bolts and two lock nuts to install the new handle in lieu of the rivets you drilled out earlier.
    • Tighten them down with a socket and ratchet.
    • Clip the door latch rod back into place.
  4. step : Install the door panel (8:47)
    • Clip the door panel back on.
    • Secure with the two Phillips screws.
    • Replace the door pull and tighten down the Phillips screws.
    • Re-install the window crank with the T20 Torx screw.
    • Clip down the top of the window crank handle.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • Drill

  • Materials, Fluids, and Supplies

  • Coarse Threaded Bolts (to replace rivets)

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2011 Ford Ranger Front Chrome Exterior Door Handle Driver or Passenger Side
  • 2001-2009 Mazda B2300 Truck Chrome Exterior Door Handle Driver or Passenger Side
  • 1999-2001 Mazda B2500 Truck Front Chrome Exterior Door Handle Driver or Passenger Side
  • 1999-2007 Mazda B3000 Truck Front Chrome Exterior Door Handle Driver or Passenger Side
  • 1999-2009 Mazda B4000 Truck Front Chrome Exterior Door Handle Driver or Passenger Side

This part replaces:

  • Dorman 91111
Part #: 1ADHE00987

How-to Video:

(10:47 min)