These are Dorman brand door handles. They are designed to replace a broken or missing units.


  • Brand New Dorman Door Handles
  • Comes as a SET of 4
    • Fits both LH (Drivers Side) & RH (Passengers Side) FRONT & REAR
  • Smooth Black Finish
    • Can be painted by the buyer to any color desired or installed as is
  • Direct replacements
  • Built to strict quality control standards

These door handles make great replacements and provides a good value.

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the door panel (1:05)
    • Use a flat blade screwdriver to remove the bezel around the door latch.
    • Remove the two Phillips screws exposed.
    • Use a rag and your flat head screwdriver to pry up the door lock switch.
    • Unplug the wiring harness and set the switch aside for safe keeping.
    • Use your putty knife and a cloth rag to unclip the door panel.
    • Lift the door panel up and out to remove it.
    • Pull the switch panel through the door panel.
    • Carefully remove the water shield.
  2. step : Remove the door handle. (4:10)
    • Lift the door panel up and knock out the two rivets securing the door handle with a hammer and chisel.
    • Use a 5/16 drill bit to remove the rivets.
    • Back on the inside of the door, unbolt the 11 mm bolt securing the window track.
    • Use a pair of needle nose pliers to unclip the door handle rod.
    • Pull the door handle up and out.
  3. step : Install the new door handle. (6:00)
    • Transfer over the door handle rod.
    • Make sure the door handle mount is clear of any debris from the rivets.
    • Feed the new handle and rod down and into place.
    • Bolt the new door handle in using a ratchet and extension to access the nuts on the inside of the door.
    • Clip the rod back in.
    • Test the door handle.
    • Bolt the window track back into place.
  4. step : Reassemble the door panel (8:45)
    • Check out our door panel explorer video for more detailed door panel assembly instructions.

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 5/16 Inch Drill Bit

  • General Tools

  • Center Punch
  • Chisel
  • Hammer
  • Putty Knife

  • Materials, Fluids, and Supplies

  • Cloth Rags

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 11mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Nice Door handles, just what was expected
The handles came very quickly and were exactly what was needed. replacement went well and they are working well.
good deal from start to finish.
November 20, 2017
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
are they metal or plastic?
allen w on May 12, 2016
BEST ANSWER: Partly metal, partly plastic. The very same handle as OEM parts from Chevy.

Vehicle Fit

  • 1998-2001 Ford Explorer Front & Rear Exterior Door Handle 4 Piece Set Dorman 79102
  • 2001-2005 Ford Explorer Sport Trac Front & Rear Exterior Door Handle 4 Piece Set Dorman 79102
  • 1998-2001 Mercury Mountaineer Front & Rear Exterior Door Handle 4 Piece Set Dorman 79102

This part replaces:

  • OE # F87Z7822404BAL
  • OE # 2L2Z7822404AAPTM
  • Partslink FO1310117
  • Dorman 79102
Only 3 left in stock
Part #: DMDHS00019

Brand #: 79102

How-to Video:

(09:33 min)