Replaces

Exhaust Manifold - 1AEEM00081

Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Our aftermarket manifolds are some of the highest quality replacements on the market!

If your vehicle's exhaust is getting loud and the exhaust noise is coming from under the hood or engine then you may need to fix a cracked exhaust manifold. Replacing a broken manifold is easiest with a direct replacement manifold that will fit correctly and bolt up to you original engine and exhaust system. This manifold is a direct fitting replacement.

This cast iron manifold has been designed to eliminate the faults of the original Dodge design. Designed for use with non emissions vehicles.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side)
  • Replaces dealer part numbers: 3769103, 9769109
  • 2 Bolt Flange
  • Center dump design
  • Direct replacement
  • Corrosion resistant
  • Replaces original manifolds that are cracked from thermal expansion and contraction
  • Strengthened and redesigned in the vulnerable areas of failure
  • Does NOT have a heat riser

Now you can buy a high quality exhaust manifold for less than 1/2 the price of the dealer. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
1
0
0
FAST SERVICE CORRECT PARTS
MANIFOLD CAME FAST AND CORRECT FIT NO SURFACING NEEDED!
August 18, 2017
Does the job but not impressed
The exhaust manifold does its job of getting the exhaust gasses away, but in other every sense its not good quality. The casting is very pitted and it doesnt have a threaded hole for dipstick. So if youre going for restoration, I would recommend more expensive ones. But if you just need operational, this is for you!
August 26, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this have a heat riser built in or is it even required? The passenger side does
Patrick P April 8, 2016
Mine did not have heat riser. Eng was built w/out one. dodge 440-3.
Robert B April 9, 2016
No, I bought the gaskets that are high that cover the valve cover
Raul C April 9, 2016
NO heat riser...check the quality of the casting mine had a pin hole in it and had to clearance a bolt hole to get it installed.
Eric W April 10, 2016
No heat riser on this part
Brian F April 11, 2016
Does it fit a south wind rv 1987
Jason D July 11, 2016
In my case (2006 Winnebago Voyage with 8.1L engine) the length of the new manifolds tail stock was longer than the original, making it very difficult to mate up with the exhaust pipe (impossible without modifying the exhaust pipe). Plus the type of gasket used on the new manifold was different than the original (flat washer-type gasket on new; recessed doughnut-type on original). So make sure you check out both aspects before you move forward. Otherwise, the new manifold was just a good a quality as the original. And as far as a heat riser, just block it off it its not needed.
I N October 6, 2017
No heat riser nor is one required on this part. This part was designed for a beveled donut style gasket.
J P September 30, 2018
Year Make Model Description
1972-1978Dodge D200 Truck Dodge D200 Truck Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1972-1978Dodge D200 Truck Dodge D200 Truck Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1972-1978Dodge D300 Truck Dodge D300 Truck Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1972-1978Dodge D300 Truck Dodge D300 Truck Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1972-1978Dodge Motorhome M300/600 Dodge Motorhome M300/600 Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1972-1978Dodge Motorhome M300/600 Dodge Motorhome M300/600 Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1974Dodge Ramcharger Dodge Ramcharger Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1974-1978Dodge Ramcharger Dodge Ramcharger Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1976-1978Dodge Ramcharger Dodge Ramcharger Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1976Dodge Van - Full Size Dodge Van Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1972-1978Dodge W100 Truck Dodge W100 Truck Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1972-1978Dodge W100 Truck Dodge W100 Truck Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1972-1978Dodge W200 Truck Dodge W200 Truck Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1972-1978Dodge W200 Truck Dodge W200 Truck Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1972-1978Dodge W300 Truck Dodge W300 Truck Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1972-1978Dodge W300 Truck Dodge W300 Truck Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1974-1978Plymouth Trailduster Plymouth Trailduster Exhaust Manifold V8 7.2L 440ci Driver or Passenger Side
1974Plymouth Trailduster Plymouth Trailduster Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
1976-1978Plymouth Trailduster Plymouth Trailduster Exhaust Manifold V8 6.6L 400ci Driver or Passenger Side
Part #: 1AEEM00081


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout