Description
Warranty & Shipping
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Material:   Cast Iron

Our aftermarket manifolds are some of the highest quality replacements on the market!

If your vehicle's exhaust is getting loud and the exhaust noise is coming from under the hood or engine then you may need to fix a cracked exhaust manifold. Replacing a broken manifold is easiest with a direct replacement manifold that will fit correctly and bolt up to you original engine and exhaust system. This manifold is a direct fitting replacement.

This cast iron manifold has been designed to eliminate the faults of the original Jeep design.

Specifications:

  • Includes heat shield
  • 2 bolt flange
  • Includes Gaskets and Hardware
  • Direct replacement
  • Replaces original manifolds that are cracked from thermal expansion and contraction
  • Corrosion resistant
  • Strengthened and redesigned in the vulnerable areas of failure

Now you can buy a high quality exhaust manifold that is built to strict quality control standards for about almost 1/3 the price of the dealer. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

4.00/ 5.0
8 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
3
1
1
0
Great fit at a very affordable price and delivery time was wonderful as well.
July 17, 2017
So far, so good!!!
My Wrangler has leaked exhaust since I bought it a year ago. Tried several liquid metal products to fill the cracks and the last one was fairly successful, but there was still a leak. Bought this based on the reviews and warranty, and my Jeep sounds/smells awesome!! I took the power steering pump off the intake, removed the airbox and tube, removed the throttle cable, then left all the electrical connections in place. Took out the bolts and slid the exhaust out from between the intake and head. Took about an hour and a half. Well made product and works great so far. Dan
August 10, 2017
manifold
looks good I put it on now well see how it lasts......
August 20, 2017
Jeep 2.5 exh.manifold
Great price on this part. Heavier made than the original. However , the flange was thicker than original , thicker than the intake flange, and that required machining to let the bolt and washer properly hold the manifold set together against the head. Both flanges have to be the same thickness. The intake will not tighten without removal of some of the extra thickness from the new exhaust manifold flange.
August 23, 2017
Great price
I purchased the exhaust manifold from 1A for about half what it was at the "parts house". I personally did not install it I had a mechanic do it. He didnt have any complaints adout the install and as far as i can tell it works great no leaks. I would recommend this item to anyone. It was also shipped and delivered in a very timely manner.
March 7, 2018
Much better that original
Much heavier and robust than the factory manifold that was on my TJ. Bolting surfaces are about an 1/8" thicker which causes an issues where exhaust manifold and intake manifold share bolts. Easily remedied by spot facing these areas with a mill or small grinder (dremel, die grinder, etc)
April 4, 2018
Jeep TJ 4 cyl exhaust manifold
The manifold arrived quickly. It was a good fit, however some modification to the heat shield was necessary to install the top center bolt and to clear the motor mount. This was frustrating as it had to be removed twice. Jeep is very quiet now.
July 30, 2018
Manifold is thicker than stock
As the title states, the manifold is thicker than the stock one, on the plate specifically where it bolts to the head. The issue is that the intake is now to thin (bolts on with the manifold). The heat shield was also in the way of one of the bolt holes and had to be modified. Ill figure out a way to make it work. The manifold looks to be good quality, despite the flaws.
November 18, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1983-1984American Motors Eagle American Motors Eagle Cast Iron Exhaust Manifold L4 2.5L
1996-2002Dodge Dakota Dodge Dakota Cast Iron Exhaust Manifold L4 2.5L
1983-1986Jeep CJ7 Jeep CJ7 Cast Iron Exhaust Manifold L4 2.5L
1983-1985Jeep CJ8 Scrambler Jeep CJ8 Scrambler Cast Iron Exhaust Manifold L4 2.5L
1984-2000Jeep Cherokee Jeep Cherokee Cast Iron Exhaust Manifold L4 2.5L
1986-1992Jeep Comanche (MJ) Jeep Comanche (MJ) Cast Iron Exhaust Manifold L4 2.5L
1984-1987Jeep Wagoneer Jeep Wagoneer Cast Iron Exhaust Manifold L4 2.5L
1987-1995Jeep Wrangler Jeep Wrangler Cast Iron Exhaust Manifold L4 2.5L
1997-2002Jeep Wrangler Jeep Wrangler Cast Iron Exhaust Manifold L4 2.5L
Part #: 1AEEM00026


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout