If your vehicle's exhaust is getting loud and the exhaust noise is coming from under the hood or engine then you may need to fix a cracked exhaust manifold. Replacing a broken manifold is easiest with a direct replacement manifold that will fit correctly and bolt up to you original engine and exhaust system. This manifold is a direct fitting replacement.

This manifold has been designed to eliminate the faults of the original design.

Specifications:

  • RH (Passenger Side)
  • Includes:
    • (1) Exhaust manifold
    • (2) Gaskets (manifold to cylinder head)
    • (2) Exhaust flange Studs
    • (2) Exhaust flange Nuts
  • Replaces dealer part numbers: 3L3Z-9430-DA, 7C3Z-9430-A, 3L3E-9430-DA, 3L3E-9430-DA, 7C3E-9430-DA, 7C3E-9430-DA, 3L3Z9430DA, 7C3Z9430A, 3L3E9430DA, 3L3E9430DA, 7C3E9430DA, 7C3E9430DA
  • Direct replacement part
  • Replaces original manifold that is cracked from thermal expansion and contraction
  • Strengthened and redesigned in the vulnerable areas of failure

Now you can buy a high quality exhaust manifold and install kit for less than the price of the dealer. REPLACE your broken, warped, or cracked one now with this great fitting, alternative.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
2006 F150 5.4 Exhaust Manifold
Received the parts on time and in very good condition, will do business again
August 30, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
why only two studs and nuts? Are they copper alloy as ford uses? I need 8 studs and nuts ,not going to reuse old ones???
paul k on Jun 10, 2017
BEST ANSWER: The 2 studs and nuts are for the exhaust pipe flange connection. you will need to purchase the studs and nuts that mount the exhaust manifold to the head separately. the cost from 1A is very reasonable the pack of 8 studs and nuts.

Vehicle Fit

  • 2005-2008 Ford Expedition Exhaust Manifold & Gasket Kit Passenger Side
  • 2009 Ford Expedition Exhaust Manifold & Gasket Kit (Built Before 10/20/08 Production Date) Passenger Side
  • 2004 Ford F150 Truck New Body Style Exhaust Manifold & Gasket Kit V8 5.4L Passenger Side
  • 2005-2008 Ford F150 Truck Exhaust Manifold & Gasket Kit V8 5.4L Passenger Side
  • 2009 Ford F150 Truck Exhaust Manifold & Gasket Kit V8 5.4L (8th Vin Digit V) (Built Before 10/20/08 Production Date) Passenger Side
  • 2005-2008 Ford F250 Super Duty Truck Exhaust Manifold & Gasket Kit Passenger Side V8 5.4L
  • 2009 Ford F250 Super Duty Truck Exhaust Manifold & Gasket Kit Passenger Side V8 5.4L (Built Before 10/20/08 Production Date)
  • 2005-2008 Ford F350 Super Duty Truck Exhaust Manifold & Gasket Kit Passenger Side V8 5.4L
  • 2009 Ford F350 Super Duty Truck Exhaust Manifold & Gasket Kit Passenger Side V8 5.4L (Built Before 10/20/08 Production Date)
  • 2006-2008 Lincoln Mark LT Exhaust Manifold & Gasket Kit Passenger Side
  • 2005-2008 Lincoln Navigator Exhaust Manifold & Gasket Kit Passenger Side
  • 2009 Lincoln Navigator Exhaust Manifold & Gasket Kit (Built Before 10/20/08 Production Date) Passenger Side

This part replaces:

  • OE # 3L3Z 9430DA
  • Hollander 327-02122R
  • Dorman 674-694
Part #: 1AEEM00628