Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   3 Piece Set

These replacement engine & transmission mounts are just what you need to keep your motor firm in place!

Specifications:

  • Engine, Torque Strut, and Transmission Mount SET of 3
  • Includes:
    • Engine Mount
    • Torque Strut
    • Transmission Mount
  • Direct replacement
  • No modifications needed
  • Fits automatic transmissions ONLY

Replace your broken mount now with this great fitting aftermarket kit. It makes a great replacement and has good cost savings over a dealer set.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Support your engine (1:13)
    • Find the lift point for the engine underneath the vehicle and set up a jack.
  2. step : Remove the radiator coolant bottle (1:30)
    • Use a flat blade screwdriver to pry up the clips.
    • Use a 10 mm socket and ratchet to remove the one bolt anchoring it.
    • Move the radiator coolant bottle out of the way.
  3. step : Remove the engine mount (2:00)
    • Remove the seven 15 mm nuts and bolts using a socket, extension and ratchet to do this.
    • Work the mount out of the engine bay, it might take some finesse.
    • Twist off the big clip from the motor mount and set aside.
    • Remove the 15 mm bolts and drill out the rivets to remove the mount from its bracket.
  4. step : Install the new motor mount. (4:45)
    • Assemble your motor mount and bracket.
    • Finesse the motor mount assembly into the engine bay and line up the bolt points.
    • Bolt all the 15 mm bolts down.
    • Torque them to 50 foot lbs.
    • Clip the radiator reservoir back into place and bolt in the 10 mm bolt.

Tools needed for replacement:

    Allen Wrenches

  • 5/64 Allen Wrench
  • 5mm Allen Wrench
  • 5/16 Inch Allen Wrench
  • 8mm Allen Wrench
  • 3/8 Inch Allen Wrench
  • 7mm Allen Wrench

  • Drills, Drill Bits & Related

  • Drill
  • 9/16 Inch Drill Bit

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Sockets - Metric

  • 10mm Socket
  • 15mm Socket

  • Wrenches - SAE

  • 1/2 Inch Wrench

4.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
0
0
top motor mount
Everything went good disassembling (video was very helpful ) the reassembling was disappointment when the 2 original bolts were a 1/2" to long for the new rubber piece so then i had to go to town an find bolts that would work. the lower mount went together fine an was the real problem. havent got to the third piece yet.
September 23, 2017
very pleased
they work great .. all three came together... smooth now shifting from park on the road also not to bad install very happy with my order great experance each time I have ordered every part and great prices I will be using 1A Auto again ..
May 5, 2018
Great bundle prices
1A, in my opinion the best place for quality low priced auto parts with fast shipping. Ive bought all of my parts needed for my build with out any problems. The website makes it easy to locate parts with preloaded Make & Model menu. I will be making more purchases thats for sure. Check out donskystarsky on YouTube to see the Zombie Chevy Build using A1s parts and knowledge .
June 11, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
We need motor mounts?
Tae W November 24, 2017
You may need engine mounts to be replaced if they are cracked, or there is too much room compared to the OE specifications. It must be diagnosed as faulty.
Alex P November 24, 2017
Yes. You will know when your motor mounts are bad when there is a shaking feeling when you accelerate. You can also tell if you can actually shake the engine forward and back.
Steve M December 9, 2017
You have engine/motor mounts on your engine. You will know if you need mounts if you are looking at your engine and snap the throttle and the engine rocks back and forth significantly towards the front and rear of the vehicle on a front wheel drive application.
Steve M January 23, 2018
Year Make Model Description
1995Chevy Cavalier Chevy Cavalier Engine & Transmission Mount Kit 3 Piece Set L4 2.3L with Automatic Transmission
1995-2002Chevy Cavalier Chevy Cavalier Engine & Transmission Mount Kit 3 Piece Set L4 2.2L with Automatic Transmission
1996-2002Chevy Cavalier Chevy Cavalier Engine & Transmission Mount Kit 3 Piece Set L4 2.4L with Automatic Transmission
1995Pontiac Sunfire Pontiac Sunfire Engine & Transmission Mount Kit 3 Piece Set L4 2.3L with Automatic Transmission
1995-2002Pontiac Sunfire Pontiac Sunfire Engine & Transmission Mount Kit 3 Piece Set L4 2.2L with Automatic Transmission
1996-2002Pontiac Sunfire Pontiac Sunfire Engine & Transmission Mount Kit 3 Piece Set L4 2.4L with Automatic Transmission
Part #: 1AEEK00561


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:50 min)