The EGR valve in your vehicle is a critical part of the emission reduction system on your vehicle. At certain throttle levels the valve allows exhaust gasses to recirculate through the engine combustion process. This process is key in reducing Nitrogen Oxide emissions.

Specifications:

  • Brand New EGR Valve
  • Includes gasket
  • Replaces dealer part numbers: F7LZ9D475AA, F7LZ 9D475 AA, F7UZ9D475A4A, F7UZ 9D475 A4A, XC2Z9D475AB, XC2Z 9D475 AB, 1F2220300, 1F2 220300
  • Direct Fit
  • Built to strict quality control standards

If your vehicle is running rough or has failed emissions due to a bad EGR valve then this is the part for you.

 

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Exhaust Gas Recirculation (EGR) Valve (1:28)
    • Apply rust penetrant to the exhaust gas tube
    • Remove the Loosen the 27mm nut on the exhaust gas tube
    • Disconnect the exhaust tube from the EGR valve
    • Remove the vacuum hose from the EGR valve
    • Remove the two 10mm bolts from the EGR valve
    • Pull off the EGR valve
  2. step : Installing the EGR Valve (3:40)
    • Scrape any gasket residue with a razor blade off the EGR mounting surface
    • Start the two 10mm bolts into the EGR valve
    • Put the EGR valve into place
    • Tighten the two 10mm bolts to 15 foot-pounds of torque
    • Connect the vacuum hose to the EGR valve
    • Put the exhaust gas tube into place
    • Tighten the 27mm nut on the exhaust hose
    • Start the engine
    • Check for exhaust leaks

Tools needed for replacement:

    General Tools

  • Razor Blade / Gasket Scraper

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 10mm Socket
  • 27mm socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
2011 Ford Ranger 4.0L EGR Valve Replacement
The product was delivered on time and at a fair price. The video provided the install the EGR valve was very easy to understand and the instructions were very clear. I was able to complete the entire process in about 15 minutes. I am very, very satisfied with the part and the ease with which the video assisted with the installation.
May 10, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1997-2004 Ford E150 Van EGR Valve V8 4.6L
  • 1997 Ford E250 Van EGR Valve V8 4.6L
  • 2003-2004 Ford E250 Van EGR Valve V8 4.6L
  • 2001 Ford Explorer EGR Valve V6 4.0L (8th Vin Digit E) (Built After 7/26/00 Production Date) Sport
  • 2002-2003 Ford Explorer EGR Valve V8 4.0L (8th Vin Digit E) Sport
  • 2001-2011 Ford Ranger EGR Valve V6 4.0L
  • 1997-1998 Lincoln Mark VIII EGR Valve
  • 2001-2009 Mazda B4000 Truck EGR Valve

This part replaces:

  • Standard Motor Products EGV538T
Part #: 1AEGR00234

How-to Video:

(05:15 min)